Bedienungsanleitung Pioneer FH-X840 (Seite 6 von 204) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

649205

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

6En

Displays the list of all service components/stations. Press again to search for a

service component/station alphabetically.

2 Select a service component/station from the list you selected, then press the M.C.

dial to confirm.

NOTE

You can update the service list by pressing and holding . To cancel updating, press and hold

again.

To store service components/stations

1 While receiving the service component/station you want to store, press and hold

one of the number buttons (1/ to 6/ ) until it stops flashing.

To retrieve stored service components/stations

1 Select the band, then press a number button (1/ to 6/ ).

The unit stores recent broadcasts in the memory automatically. The memory capacity of

thi

s unit varies depending on the bit rate of the service component/station used. The

approximate memory capacity is five minutes for 192 kbps.

To pause/resume

1 While receiving the service component/station, press and hold DISP.

To use the time shift function

1 While receiving the service component/station, press and hold BAND/ .

2 Press (skip back one minute)/ (skip forward one minute) to adjust the

playback point.

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the

ddle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS

Presetting service components/stations

Pause/Time shift functions

Radio

(radio data system) function only works in areas that broadcast RDS signals for FM

stations.

1 Press SRC/OFF to select [RADIO].

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].

3 Press a number button (1/ to 6/ ).

NOTE

You can select a preset channel by pressing and turning the M.C. dial.

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

FUNCTION settings (page 15).

The six strongest stations are stored on the number buttons (1/ to 6/ ).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1 After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops

when the unit receives a station. To cancel seek tuning, press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 15).

To store stations manually

1 While receiving the station you want to store, press and hold one of the number

buttons (1/ to 6/ ) until it stops flashing.

NOTE

You can select a preset channel by pressing and turning the M.C. dial. After selecting a channel,

press and hold the M.C. dial to store a station.

Receiving preset stations

Best stations memory (BSM)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer FH-X840 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info