Bedienungsanleitung Pioneer HTP-070 (Seite 20 von 31) (Englisch)

573843

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Basic playback

Searching for RDS programs

You can search for a program type listed above.

1 Press TUNER then press BAND to select the FM band.

• RDS is only possible in the FM band.

2 Press PTY SEARCH.

SEARCH shows in the display.

3 Press PRESET

/

to select the program type you

want to hear.

4 Press ENTER to search for the program type.

The system starts searching through the station presets for a

match, stopping when it was found one. Repeat to search for

other stations.

If NO PTY is displayed it means the tuner couldn’t find that

program type at the time of the search.

• RDS searches station presets only. If no stations have

been preset, or if the program type could not be found

among the station presets NO PTY is displayed. FINISH

means the search is complete.

Displaying RDS information

Use the DISP button to display the different types of RDS

information available.



Press DISP for RDS information.

Each press changes the display as follows:

• Listening mode

•Master volume

• Radio Text (RT) – Messages sent by the radio station. For

example, a talk radio station may provide a phone number

as RT.

• Program Service Name (PS) – The name of the radio

station.

•Program Type (PTY) – This indicates the kind of program

currently being broadcast.

• Current tuner frequency (FREQ)

Note

• If any noise is picked up while displaying the RT scroll,

some characters may be displayed incorrectly.

• If you see NO TEXT in the RT display, it means no RT data

is sent from the broadcast station. The display will

automatically switch to the PS data display (if no PS data,

NO NAME is displayed).

• In the PTY display, NO PTY may be shown.

Making an audio recording

You can make an audio recording from the built-in tuner, or

from an audio source connected to the receiver (such as a

CD player).

Only audio signals that were input to this receiver through a

analog audio inputs can be recorded. Signals that were input

through an HDMI cable or digital audio cable (optical /

coaxial) cannot be recorded (see Connecting other audio

components on page 15 for more on connections).

1 Press input function buttons to select the input function

you want to record.

The input of the receiver will switch over, and you will be able

to operate other components using the remote control.

• The input source can also be selected by using INPUT

SELECT buttons on the remote control, or by

using the front panel INPUT SELECTOR dial.

2 Select the audio input signal (if necessary).

Press SIGNAL SEL and select the analog inputs (A) for the

source component of which you want to record (see page 17

for more on this).

3 Prepare the source you want to record.

Tune to the radio station, load the CD etc.

4 Prepare the recorder.

Insert a blank tape, MD etc. into the recording device and set

the recording levels.

Refer to the instructions that came with the recorder if you

are unsure how to do this.

5 Start recording, then start playback of the source

component.

Note

• The receiver’s volume, balance, tone (bass, treble,

loudness), and surround effects have no effect on the

recorded signal.

INPUT SELECT

SOURCESLEEP

CONTROL

INPUT

RECEIVER

ADV SURR

VOL

RECEIVER

BD MENU

BD DVD TV

DVR/BDR

CD-R

ADAPTER

TUNER

PORTABLE

PHASE

SIGNAL SELS.RETRIEVER

DTV/TV

ENTER

SB CH

DISP

CH SELECT

MUTE

RETURN

AUDIO

PARAMETER

TUNER EDIT

TOOLS

MASTER

VOLUME

BAND

TRE

BASS

TOP

HDD DVD VCR

TEST TONE

HOME

SETUP

PTY SEARCH

AUTO/

DIRECT

ALC/

STANDARD

STEREO

INPUT SELECT

SOURCESLEEP

CONTROL

INPUT

RECEIVER

VOL

RECEIVER

BD DVD TV

DVR/BDR

CD-R

ADAPTER

TUNER

PORTABLE

PHASE

SIGNAL SELS.RETRIEVER

DTV/TV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer HTP-070 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer HTP-070

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info