Bedienungsanleitung Pioneer HTZ-FS30DVD-AP (Seite 23 von 126) (Englisch)

573879

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Listening to your system 05

English

FrançaisDeutsch

Nederlands

Italiano Español

• MUSIC (Dolby Pro Logic II Music) – Pro

Logic II 5.1 channel surround sound,

especially suited to music sources (use

with any two-channel source)

• DOLBY PL (Dolby Pro Logic) – 4.1 channel

surround sound (use with any two-channel

source)

Each mode shown below is a Pioneer original

sound field mode and is called an “Advanced

Surround” mode.

• ACTION – Designed for action movies with

dynamic soundtracks

• UNPLUGED – Suitable for acoustic music

sources

• EXPANDED – Creates an extra wide stereo

field.

• TV SURR – Provides surround sound for

both mono and stereo TV sources.

• SPORTS – Suitable for sports programs

• ADV.GAME – Suitable for video games

• X-STEREO (Extended Stereo)– Gives

multichannel sound to a stereo source,

using all of your speakers.

Dolby Pro Logic II Music settings

When listening in Dolby Pro Logic II Music

mode, there are three settings you can adjust:

Center Width, Dimension, and Panorama.

1 With Dolby Pro Logic II Music mode

active, press

SOUND

2Use

/

to select C.WIDTH, DIMEN or

PANORAMA then press

ENTER

• C.WIDTH (Center Width) – Provides a

better blend of the front speakers by

spreading the center channel between the

front right and left speakers, making it

sound wider (higher settings) or narrower

(lower settings).

• DIMEN (Dimension) – Adjusts the depth of

the surround sound balance from front to

back, making the sound more distant

(minus settings), or more forward (positive

settings).

• PANORAMA – Extends the front stereo

image to include the surround speakers for

a ‘wraparound’ effect.

3Use

/

to adjust each setting.

• C.WIDTH is adjusted within a range of 0

and 7.

• DIMEN is adjusted within a range of –3

and +3.

•For PANORAMA, select from PNRM OFF

and PNRM ON.

4Press

ENTER

to confirm.

Using Front Stage Surround

Advance

The Front Stage Surround Advance modes are

effective when you are using the 3spot/2spot

speaker layout as described on page 17.

•Press

SURROUND

repeatedly to select a

Front Stage Surround Advance mode.

• FOCUS5.1 – Use to provide a rich surround

sound effect directed to the center area

where the left and right speakers’ sound

projection converges.

• WIDE5.1 – Use to provide a surround

sound effect to a wider area than

FOCUS5.1 mode.

• EXTRAPWR – Outputs stereo sound (in the

case of multi-channel sources,

down-mixed stereo sound) from the

surround speakers for powerful stereo

effect.

Only for HTZ-FS30DVD/HTZ-FS30DVD-AP:

• FOCUS – equivalent to FOCUS5.1 above

• WIDE – equivalent to WIDE5.1 above

HTZ585DVD_EN.book 23 ページ２００９年３月１９日　木曜日　午後６時３５分

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer HTZ-FS30DVD-AP Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info