Bedienungsanleitung Pioneer HTZ-FS30DVD-AP (Seite 49 von 126) (Englisch)

573879

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

KURO LINK 13

English

FrançaisDeutsch

Nederlands

Italiano Español

Setting the KURO LINK mode

Choose whether to set this unit’s KURO LINK

function ON or OFF. You will need to set it to

LINK ON to use the KURO LINK function.

• When using a TV that does not support the

KURO LINK function, set this to LINK OFF.

1 Press

SHIFT+SETUP

2Use

/

to select

HDMI SET

then press

ENTER

3 Use

/

to select

KURO LINK

, then

press

ENTER

4 Use

/

to select the setting then press

ENTER

to confirm.

• LINK ON – Enables the KURO LINK

function.

• LINK OFF – The KURO LINK is disabled.

Synchronized operations cannot be used.

Before using synchronization

Once you have finished all connections and

settings, you must:

1 Put all components into standby mode.

2 Turn the power ON for all components,

with the power for the flat screen TV being

turned on last.

3 Choose DVD/CD and see if video output

displays properly on the screen or not.

Synchronized amp mode

The synchronized amp mode can be set from

the KURO LINK-compatible TV’s remote

control. See the explanation below for

operations in the synchronized amp mode.

These functions are set from the TV’s menu

screen. For more information, refer to the

operating instructions of the KURO LINK-

compatible TV.

Synchronized amp mode operations

When using the synchronized amp mode, the

KURO LINK-compatible component

connected to this unit operates in sync as

described below.

• The unit’s volume can be set and the sound

can be muted using the TV’s remote control.

• When the TV’s power is set to standby, the

unit’s power is also set to standby. (The

unit’s power is automatically turned off

when the TV’s power is turned off while a

video DVD is being played on the unit.

However, the unit’s power may not turn off

automatically in some cases, for example,

if you are listening to a CD or radio and turn

off the output device.)

• The unit’s input switches automatically

when the TV’s channel is switched.

• The synchronized amp mode remains in

effect even if the unit’s input is switched to

a function other than the DVD/CD.

The operations below can also be used on

Pioneer KURO LINK-compatible flat screen

TVs.

• When the unit’s volume is adjusted or the

sound is muted, the volume status is

displayed on the flat screen TV’s screen.

• When the OSD language is switched on

the flat screen TV, the unit’s language

setting also switches accordingly.

Canceling synchronized amp mode

• When the synchronized amp mode is

canceled, the unit’s power turns off if you

were viewing a TV program on the TV.

• When in the synchronized amp mode, the

synchronized amp mode is canceled when

the unit’s power is turned off. To turn the

synchronized amp mode back on, select

the synchronized amp mode using the TV’s

remote control.

• When in the synchronized amp mode, the

synchronized amp mode is canceled if an

operation that produces sound from the TV is

performed from the TV’s menu screen, etc.

HTZ585DVD_EN.book 49 ページ２００９年３月１９日　木曜日　午後６時３５分

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer HTZ-FS30DVD-AP Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info