Bedienungsanleitung Pioneer HTZ373DVD (Seite 37 von 102) (Englisch)

573923

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Additional information 10

English

FrançaisDeutsch

Nederlands

Italiano Español

Chapter 10

Additional information

Optional system settings

All the available settings in the standby setup

menu are listed below. See the notes in each

section for more information about the settings.

The first setting in each section is the default.

1 Switch the system into standby.

2Press

SHIFT+SETUP

and use

/

then

ENTER

to choose the setting you want to adjust.

The available settings are shown in the front

panel display.

3Use

/

to adjust then press

ENTER

confirm and exit.

System demo setting

Switches the automatic demo feature on or off

(this starts when you plug in for the first time):

•

DEMO ON

– Switches the demo feature on.

•

DEMO OFF

– Switches the demo feature off.

Frequency step setting

If you find that you can’t tune into stations

successfully, the frequency step may not be

suitable for your country/region.

•AM 9K

•AM 10K

TV system setting

The default setting of this system is AUTO, and

unless you notice that the picture is distorted

when playing some discs, you should leave it

set to AUTO. If you find picture distortion with

some discs, set the TV system to match your

country or region’s system. However, this may

restrict the kinds of disc you can watch. See

the table for the kinds of discs compatible with

each setting (AUTO, PAL and NTSC).

• After using

/

to choose

TV SYS

(step

above), press

ENTER

to change the TV

system as follows:

• AUTO  NTSC

• NTSC  PAL

• PAL  AUTO

The system automatically switches on and

you’ll see the new TV system setting in the

display after seeing WELCOME.

DTS CD setting

If you play a DTS-encoded CD, you will need to

change this setting to hear the decoded signal.

• NORMAL – Regular CD playback; some

DTS-encoded CDs output a noisy signal.

• DTS-CD – Proper decoding of DTS-

encoded CDs; the beginning of regular CD

tracks may be skipped.

Key lock setting

• LOCK ON – Makes the front panel buttons

and controls inoperative.

• LOCK OFF – Restores regular use of the

front panel buttons and controls.

Note

1 The setup menu is exited automatically after 5 minutes of inactivity.

2 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch

vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without

color. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV

has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands

at the top and bottom of the screen.

Player setting

Media Type

Format NTSC PAL AUTO

DVD/Super VCD/

Video CD/DivX

Video/WMV

NTSC

NTSC PAL NTSC

PAL

NTSC PAL PAL

CD/MP3/WMV/

MPEG-4 AAC/

JPEG/no disc

—

NTSC PAL NTSC or

PAL

3 You have to switch the player into standby (press  STANDBY/ON) before each change.

HTZ373_777_EN.book Page 37 Wednesday, March 5, 2008 1:08 PM

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer HTZ373DVD Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info