Bedienungsanleitung Pioneer MVH-180UB (Seite 11 von 204) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

598042

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

11En

English

5 Turn the M.C. dial to select a device from the device list, then press to

confirm.

Press and hold the M.C. dial to switch the displayed device information

between the Bluetooth device address and device name.

6 Select [Pioneer BT Unit] shown in the device display.

7 Make sure the same 6-digit number appears on this unit and the device,

then select “Yes” on the device.

NOTES

• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this

case, delete one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the

Bluetooth settings (page 11).

• Depending on the device, the PIN code is required in step 7. In this case, input [0000].

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth

device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a

Bluetooth device operations, refer to the operating instructions supplied with the

Bluetooth device.

Bluetooth settings

Menu Item Description

DEVICELIST Display the list of paired Bluetooth devices. “*” appears

on the device name when the Bluetooth connection is

established.

DEL DEVICE Delete the device information.

[DELETE YES],

[DELETE NO]

ADD DEVICE Register a new device.

A.CONN Select [ON] to connect to a Bluetooth device

automatically.

[ON], [OFF]

First, make a Bluetooth connection with the Bluetooth telephone (page 10).

Up to two Bluetooth telephones can be connected simultaneously.

Important

• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is

not running can drain the vehicle’s battery.

• Be sure to park your vehicle in a safe place and apply the parking brake before operation.

VISIBLE Select [ON] so that a Bluetooth device can detect the

unit when the unit is connected via Bluetooth to another

device.

[ON], [OFF]

PIN CODE Change the PIN code.

1 Press the M.C. dial to display the setting mode.

2 Turn the M.C. dial to select a number.

3 Press the M.C. dial to move the cursor to the next

position.

4 After inputting the PIN code, press and hold the M.C.

dial.

After inputting the PIN code, pressing the M.C. dial

returns you to the PIN code input display, and you can

change the PIN code.

DEV. INFO Switch the device information on the display between

the device name and Bluetooth device address.

GUEST MODE Select [ON] to move to the [DEL DEVICE] screen

automatically when the unit has already been paired

with three devices.

[ON], [OFF]

A.PAIRING Select [ON] to pair the unit and iPhone automatically

when an iPhone is connected to the unit via USB. (This

function may not be available depending on the version

of iOS you are using.)

[ON], [OFF]

Bluetooth telephone

Menu Item Description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer MVH-180UB Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info