Bedienungsanleitung Pioneer MVH-A100V (Seite 19 von 26) (Englisch)

699590

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

19En

English

You can adjust the cutoff frequency value of each speaker.

[Speaker Level]

[Front Left] [Front Right]

[Rear Left] [Rear Right]

[Subwoofer] [Listening

Position]

Adjust the speaker output level of the listening position.

1 Touch or to select the listening position then

select the output speaker.

2 Touch or to adjust the selected speaker output

level.

NOTE

For rear speaker, this function is available only when [Rear] is

selected in [Rear Speaker Output].

[Crossover] Select a speaker unit (filter) to adjust the HPF or LPF cut-off

frequency and the slope for each speaker unit (page 19).

[Subwoofer Settings] Select the subwoofer phase, LPF cut-off frequency and the

slope (page 19).

[Listening Position]

[Off] [Front-L] [Front-R]

[Front] [All]

Select a listening position that you want to make as the

centre of sound effects.

[Time Alignment]

[Front Left] [Front Right]

[Rear Left] [Rear Right]

[Subwoofer] [Listening

Position]

Select or customise the time alignment settings to reflect

the distance between the listener’s position and each

speaker. You need to measure the distance between the

head of the listener and each speaker unit.

1 Touch or to select the listening position then

select the alignment speaker.

2 Touch or to input the distance between the

selected speaker and listening position.

NOTE

This function is available only when the listening position setting

is set to [Front Left] or [Front Right].

[Bass Boost]

[0] to [+6]

Adjust the bass boost level.

[Rear Speaker Output]

[Rear] [Subwoofer]

Select the rear speaker output.

NOTE

This function is available when the source is off.

[Loudness]

[Off] [Low] [Mid] [High]

Compensates for deficiencies in the low-frequency and

high-frequency ranges at low volume.

NOTE

This function is not available while you make or receive a call using

the hands-free function. (MVH-A200VBT)

Adjusting the cutoff frequency value

Menu Item Description

The following speakers can be adjusted:

Front, Rear, Subwoofer.

NOTE

[Subwoofer Settings] is available only when [Subwoofer] is [On].

1 Press .

2 Touch then .

3 Touch [Crossover] or [Subwoofer Settings].

4 Touch or to switch the speaker.

5 Touch or to set the cutoff position.

6 Touch or to set the cutoff slope.

The following items can also be set.

The menu items vary according to the source.

Switches the subwoofer phase between normal and reverse position.

LPF/HPF

Switches the LPF/HPF setting to [On] or [Off].

Video settings

[Time Per Photo Slide]

Menu Item Description

[Time Per Photo Slide]

[5sec] [10sec] [15sec]

[Manual]

Select the interval of image file slideshows on this product.

[Video Signal Setting]

Menu Item Description

[AUX]

[Auto] [PAL] [NTSC] [PAL-

M] [PAL-N] [SECAM]

Select the suitable video signal setting when you connect

this product to an AUX equipment.

[Camera]

[Auto] [PAL] [NTSC] [PAL-

M] [PAL-N] [SECAM]

Select the suitable video signal setting when you connect

this product to a rear view camera.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer MVH-A100V Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer MVH-A100V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info