Bedienungsanleitung Pioneer MVH-A200VBT (Seite 16 von 26) (Englisch)

699591

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

16En

A separately sold rear view camera (e.g. ND-BC8) is required for utilising the rear view

camera function. (For details, consult your dealer.)

▶Rear view camera

This product features a function that automatically switches to the full-screen image of

the rear view camera installed on your vehicle when the gearstick is in the REVERSE (R)

position.

Camera View mode also allows you to check what is behind you while driving.

▶Camera for Camera View mode

Camera View can be displayed at all times. Note that with this setting, the camera image

is not resized to fit, and that a portion of what is seen by the camera is not viewable.

To display the camera image, touch [Camera] on the AV source selection screen (page 9).

NOTE

To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]

(page 16).

CAUTION

Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen

image may appear reversed.

• Immediately verify whether the display changes to the rear view camera image when the gearstick is

moved to REVERSE (R) from another position.

• When the screen changes to full-screen rear view camera image during normal driving, switch to the

opposite setting in [Camera Polarity].

• If you touch while the camera image is displayed, the displayed image turns off temporarily.

[AUX Input]

Menu Item Description

[AUX Input]

[Off] [AV] [MIC]

Set to [MIC] for Karaoke function (page 15).

[Camera settings]

Menu Item Description

[Back Camera Input]

[Off] [On]

Setting rear view camera activation.

[Camera Polarity] Setting the polarity of the rear view camera.

[Battery] The polarity of the connected lead is positive.

[Ground] The polarity of the connected lead is negative.

NOTE

This function is available when [Back Camera Input] is set to [On].

If you feel that the touch panel keys on the screen deviate from the actual positions that

respond to your touch, adjust the response positions of the touch panel screen.

[Safe Mode]

Menu Item Description

[Safe Mode]

[On] [Off]

Set the safe mode that regulate operating some functions

only when you stop your vehicle in a safe place and apply

the handbrake.

[System Language]

Menu Item Description

[System Language] Select the system language.

NOTES

• If the embedded language and the selected language setting are

not the same, the text information may not display properly.

• Some characters may not be displayed properly.

[Restore Settings]

Menu Item Description

[Restore Settings] Touch [Restore] to restore the settings to the default

settings.

CAUTION

Do not turn off the engine while restoring the settings.

NOTES

• This setting is available only when you stop your vehicle in a safe

place and apply the handbrake.

• The source is turned off and the Bluetooth connection is

disconnected before the process starts (MVH-A200VBT).

[Beep Tone]

Menu Item Description

[Beep Tone]

[On] [Off]

Select [Off] to disable the beep sound when the button is

pressed or the screen is touched.

[Touch panel calibration]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer MVH-A200VBT Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer MVH-A200VBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info