Bedienungsanleitung Pioneer MVH-X560BT (Seite 9 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

651395

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Black plate (9,1)

Using voice recognition

This feature can be used on an iPhone equipped

with voice recognition that is connected by

Bluetooth.

1 Press and hold M.C. to switch to voice

recognition mode.

2 Press M.C. and then talk into the micro-

phone to input voice commands.

To end voice recognition mode, press BAND/

Notes

! For details on voice recognition features,

check the manual for your iPhone.

! In order for your voice commands to be rec-

ognized and interpreted correctly, ensure

that conditions are suitable for recognition.

! Please note that wind blowing through the

vehicle windows and noise coming from out-

side the vehicle can interfere with voice com-

mand operation.

! For optimum pick-up, the microphone should

be placed directly in front of the driver at a

suitable distance.

! Speaking too soon after the start of the com-

mand may cause voice recognition to fail.

! Speak slowly, deliberately, and clearly.

Connection menu operation

Important

Connected devices may not work properly if

more than one Bluetooth device is connected at

a time (e.g. a phone and a separate audio player

are connected simultaneously).

1 Press and hold

to display the connec-

tion menu.

# You cannot perform this step during a call.

2 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

DEVICELIST (connecting or disconnecting a de-

vice from the device list)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you

want to connect/disconnect.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect/disconnect the selected

device.

If the connection is established, * is indicated

on the device name.

! When no device is selected in the device list,

this function is not available.

DEL DEVICE (deleting a device from the device

list)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you

want to delete.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to display DELETE YES.

4 Press M.C. to delete the device information

from the device list.

! When no device is selected in the device list,

this function is not available.

! While this function is in use, do not turn off

the engine.

ADD DEVICE (connecting a new device)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, NOT FOUND is displayed.

2 Turn M.C. to select a device from the device

list.

! If the desired device is not displayed, select

RE-SEARCH.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the de-

vice name (Pioneer BT Unit) and enter the

PIN code on your device.

! PIN code is set to 0000 as the default. You

can change this code.

! A 6-digit number may display on both this

unit and the Bluetooth device.

Select yes if the 6-digit numbers displayed

on this unit and the Bluetooth device are

the same.

! 6-digit number appears on the display of

this unit. Once the connection is estab-

lished, this number disappears.

! If you are unable to complete the connec-

tion using this unit, use the device to con-

nect to the unit.

! If three devices are already paired, DEVICE-

FULL is displayed and it is not possible to

perform this operation. In this case, delete

a paired device first.

A. CONN (connecting to a Bluetooth device auto-

matically)

1 Press M.C. to turn automatic connection on or

off.

VISIBLE (setting the visibility of this unit)

Bluetooth visibility can be turned on so that other

devices can discover the unit.

1 Press M.C. to turn the visibility of this unit on

or off.

PIN CODE (PIN code input)

You must enter a PIN code on your device to con-

firm the Bluetooth connection. The default code is

0000, but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you

to the PIN code input display, and you can

change the PIN code.

DEV. INFO (Bluetooth device address display)

1 Press M.C. to display the setting mode.

2 Turn M.C. to display the device information.

Device name—Bluetooth device address

GUEST MODE (guest mode)

When this mode is turned on, if a pairing is at-

tempted while there are already three devices

paired together, the unit will move to the DEL DE-

VICE screen automatically and prompt you to de-

lete a device. For details, refer to DEL DEVICE

(deleting a device from the device list) on page 9.

1 Press M.C. to turn the guest mode on or off.

A. PAIRING (auto pairing)

If this function is turned on while there is an

iPhone connected to the unit by USB, you will be

automatically prompted to pair the unit and

iPhone.

1 Press M.C. to turn auto pairing on or off.

! This function may not be available depending

on what version of iOS you are using.

English

Using this unit

Section

Using this unit

<QRD3242-A>9

Pioneer MVH-X560BT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer MVH-X560BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info