Bedienungsanleitung Pioneer MVH-X560BT (Seite 18 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

651395

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Black plate (18,1)

Troubleshooting

Symptoms are written in bold and causes in reg-

ular, non-indented text. Regular, indented text is

used to indicate actions to be taken.

The display automatically returns to the ordinary

display.

You did not perform any operation within about 30

seconds.

Perform operation again.

The repeat play range changes unexpectedly.

Depending on the repeat play range, the selected

range may change when another folder or track is

being selected or during fast forwarding/reversing.

Select the repeat play range again.

A subfolder is not played back.

Subfolders cannot be played when FLD (folder re-

peat) is selected.

Select another repeat play range.

NO XXXX appears when a display is changed

(NO TITLE, for example).

There is no embedded text information.

Switch the display or play another track/file.

The unit is malfunctioning.

There is interference.

You are using a device, such as a cellular phone,

that may cause audible interference.

Move electrical devices that may be causing the

interference away from the unit.

The sound from the Bluetooth audio source is

not played back.

There is a call in progress on a Bluetooth connected

cellular phone.

The sound will be played back when the call is

terminated.

A Bluetooth connected cellular phone is currently

being operated.

Do not use the cellular phone at this time.

A call was made with a Bluetooth connected cellular

phone and then immediately terminated. As a result,

communication between this unit and the cellular

phone was not terminated properly.

Reconnect the Bluetooth connection between

this unit and the cellular phone.

The Bluetooth device cannot be paired with this

unit.

The information for this unit registered to the

Bluetooth device, or that for the Bluetooth device

registered to this unit, was deleted somehow.

Delete the information for this unit registered to

the Bluetooth device and that for the Bluetooth

device registered to this unit, if not deleted

already. Then, try pairing the Bluetooth device to

this unit again.

Error messages

When you contact your dealer or your nearest

Pioneer Service Center, be sure to note the error

message.

Error messages are written in bold and causes

in regular, non-indented text. Regular, indented

text is used to indicate actions to be taken.

Common

AMP ERROR

This unit fails to operate or the speaker connection is

incorrect; the protective circuit is activated.

Check the speaker connection. If the message

fails to disappear even after the engine is

switched off/on, contact your dealer or an

authorized Pioneer Service Station for

assistance.

ERROR

The device in use does not support voice recogni-

tion.

Switch to a device that does support voice

recognition.

USB storage device/iPod

FORMAT READ

Sometimes there is a delay between the start of play-

back and when you start to hear any sound.

Wait until the message disappears and you hear

sound.

NO AUDIO

There are no songs.

Transfer the audio files to the USB storage device

and connect.

The connected USB storage device has security en-

abled.

Follow the USB storage device instructions to

disable the security.

SKIPPED

The connected USB storage device contains DRM

protected files.

The protected files are skipped.

PROTECT

All the files on the connected USB storage device

are embedded with DRM.

Replace the USB storage device.

N/A USB

The connected USB device is not supported by this

unit.

! Connect a USB Mass Storage Class compliant

device.

! Disconnect your device and replace it with a

compatible USB storage device.

CHECK USB

The USB connector or USB cable has short-

circuited.

Check that the USB connector or USB cable is

not caught in something or damaged.

CHECK USB

The connected USB storage device consumes more

than maximum allowable current.

Disconnect the USB storage device and do not

use it. Turn the ignition switch to OFF, then to

ACC or ON and then connect only compliant

USB storage devices.

CHECK USB

The iPod operates correctly but does not charge.

Make sure the connection cable for the iPod has

not shorted out (e.g., not caught in metal

objects). After checking, turn the ignition switch

OFF and back ON, or disconnect the iPod and

reconnect.

ERROR-19

Communication failed.

Perform one of the following operations.

–Turn the ignition switch OFF and back ON.

–Disconnect the USB storage device.

–Change to a different source.

Then, return to the USB source.

iPod failure.

Disconnect the cable from the iPod. Once the

iPod’s main menu is displayed, reconnect the

iPod and reset it.

ERROR-23

USB storage device was not formatted with FAT12,

FAT16 or FAT32.

USB storage device should be formatted with

FAT12, FAT16 or FAT32.

Additional information

Appendix

Additional information

<QRD3242-A>18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer MVH-X560BT Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer MVH-X560BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info