Bedienungsanleitung Pioneer N-30-K (Seite 24 von 28) (Englisch)

491907

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Additional information10

Wireless LAN

Problem Check Remedy

Network cannot be

accessed via wireless

LAN.

Wireless LAN converter’s power is

not on. (Wireless LAN converter’s

Power

WPS

and

Wireless

indicators are not all lit.)

Check that the USB cable connecting the wireless LAN

converter to the player’s

DC OUTPUT for WIRELESS LAN

terminal is properly connected (page 8).

Error 8

is displayed on the unit’s

display window.

There is a problem with the wireless LAN converter’s power

supply. Turn the unit’s power off, then disconnect the USB

cable, reconnect the USB cable and turn the unit’s power

back on.

Error 8

is still displayed after repeating the above

procedure several times, there is a problem with the unit or

the USB cable. Unplug the unit from the wall and call a

Pioneer authorized independent service company.

The LAN cable is not firmly

connected.

Firmly connect the LAN cable (page 7).

Wireless LAN converter and base

unit (wireless LAN router, etc.) are

too far apart or there is an obstacle

between them.

Improve the wireless LAN environment by moving the

wireless LAN converter and base unit closer together, etc.

There is a microwave oven or other

device generating electromagnetic

waves near the wireless LAN

environment.

Use the system in a place away from microwave ovens or

others device generating electromagnetic waves.

Avoid using devices generating electromagnetic waves as

much as possible when using the system with the wireless

LAN.

Multiple wireless LAN converters

are connected to the wireless LAN

router.

When connecting multiple wireless LAN converters, their IP

addresses must be changed.

Wireless LAN connections cannot be

established between the wireless

LAN converter and base unit

(wireless LAN router, etc.).

The wireless LAN converter must be set in order to establish

wireless LAN connections.

See

Connecting using wireless

LAN

on page 8.

Network cannot be

accessed via wireless

LAN.

The IP address settings of the player

and wireless LAN converter do not

match the settings of the wireless

LAN router, etc.

Check the IP address settings of the player and wireless

LAN converter (including the DHCP setting).

If the player’s DHCP setting is on, turn the player’s power

off, then turn the power back on.

Check that the IP address of the player and wireless LAN

converter matche the settings of the wireless LAN router,

etc.

If the player’s DHCP setting is off, set an IP address

matching the network of the base unit (wireless LAN router,

etc.).

For example, if the wireless LAN router’s IP address is

“192.168.1.1”, set the player’s IP address to “192.168.1.XXX”

(*1), the subnet mask to “255.255.255.0”, the gateway and

DNS to “192.168.1.1”.

Next, set the wireless LAN converter’s IP address to

“192.168.1.249” (*2).

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2

and 248 that is not assigned to other devices.

(*2) Set the “249” in “192.168.1.249” to a number between 2

and 249 that is not assigned to other devices.

Try making the wireless LAN

converter’s advanced settings.

The wireless LAN converter can be connected to a computer

to make the advanced wireless LAN settings. For details, see

the CD-ROM included for the wireless LAN converter. Check

the settings of the wireless LAN router, etc., then change

the settings of the wireless LAN converter.

Note, however, that making the advanced wireless LAN

settings will not necessarily improve the wireless LAN

environment. Be careful when changing the settings.

The access point is set to conceal the

SSID.

In this case, the SSID may not be displayed on the access

point list screen. If not, set the SSID, etc., by making the

wireless LAN converter settings on the receiver manually.

The access point’s security settings

use WEP 152-bit length code key or

shared key authentication.

The player does not support WEP 152-bit length code key or

shared key authentication.

Network connections cannot be

established even when the above

measures are taken.

Reset the wireless LAN converter. After this, redo the

wireless LAN converter’s settings.

About resetting

1. Check that the wireless LAN converter’s power is on.

2. Press the wireless LAN converter’s reset button for at

least 3 seconds.

3. Release the reset button.

When the wireless LAN converter is restarted, the resetting

procedure is completed.

Problem Check Remedy

N-50-K_En.book 24 ページ２０１１年９月２１日　水曜日　午後９時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer N-30-K Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer N-30-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info