Bedienungsanleitung Pioneer PDP-4280XA (Seite 32 von 362) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

57845

Zoom out

Zoom in

Vorherige Seite

1/362

Nächste Seite

Setting up08

Using the 3DYC and I-P Mode

1 Press HOME MENU.

2 Select “Picture” (

/

then ENTER).

3 Select “Pro Adjust” (

/

then ENTER).

4 Select “Others” (

/

then ENTER).

5 Select “3DYC” or “I-P Mode” (

/

then ENTER).

6 Select the desired parameter (

/

then ENTER).

7 Press HOME MENU to exit the menu.

Note

• For the 3DYC, the individual parameters are selectable only

when:

– You have selected “INPUT 1”, “INPUT 2” or “INPUT 3” as the

input source and “Video” as the input signal type (see Selecting

an input signal type on page 36); or

– You have selected “INPUT 5” as the input source and have not

connected a S-Video cable; or you have selected the analogue

tuner.

• The 3DYC setting is ineffective when SECAM, PAL60, or

4.43NTSC signals are input.

• The I-P Mode setting is disabled if you use an external input

source and select “On” for “Game Control Pref” on the “Option”

menu.

• For the I-P Mode, the individual parameters are not selectable

for the following input signals: 480p, 576p, 720p, 1080p.

Comparing picture adjustments on the

screen

During picture adjustments, you can quickly refer to the image

previously set in the same parameter, allowing you to easily

compare and select the preferred image quality.

1 Press HOME MENU.

2 Select “Picture”

(/

then ENTER).

3 Select an item to be adjusted

(/

then ENTER).

4 While performing adjustment, press BLUE on the remote

control unit.

“Before” displays and the image adjusted last time appears for

comparison.

5 Press the button again to return to the newly adjusted image.

Each press of the button toggles between “Before” and “After”.

6 Repeat steps 1 and 5 for other parameters.

7 Press HOME MENU to exit the menu.

Caution

• If you exit the menu by pressing

HOME MENU

or no operation is

performed for 60 seconds, all the parameter settings displayed last

are stored in memory.

• If you want to exit the menu without performing the adjustments (or

leaving the settings disabled) on the “After” screen, switch to

“Before” and then exit.

Note

• You cannot adjust any item while on the “Before” screen. A

warning message appears.

• When you switch to another parameter, make sure to change

the display from “Before” to “After” first, otherwise you cannot

select “Before”. A warning message appears if you don’t.

• If you exit the selection from the “Before” screen, the previous

entry is stored in the memory and the button no longer works.

• If you exit the selection from the “After” screen, the new entry is

stored in the memory and the button no longer works.

• If you move and change the “AV Selection” parameter, the new

entry in the current parameter is stored in the memory and the

button continues to work.

• You cannot compare images between different parameters on

the “AV Selection” menu (“STANDARD” and “MOVIE”, for

example).

• When you select this function, “Intelligent Mode” for “Pro

Adjust” on the “Picture” menu is set to off and image quality

returns to default settings.

• This function is not selectable:

- when you select “AV Selection”,

- when you select “Yes” or “No” on the confirmation screen for

“Reset” from the “Picture” menu or

- when you select a menu from the PC source

3DYC

Optimizes characteristics for separating brightness signals and

colour signals. This works for both video and still images.

Selections Off Deactivates 3DYC

High Enhanced 3DYC

Mid Standard 3DYC

Low Moderate 3DYC

I-P Mode

Perform optimum conversion from interlace signals to progressive

signals. This works for both video and still images.

Selections 1 Optimum for video images

2 Standard setting

3 Optimum for still images

Before

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer PDP-4280XA Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info