Bedienungsanleitung Pioneer PDP-4280XA (Seite 46 von 362) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

57845

Zoom out

Zoom in

Vorherige Seite

1/362

Nächste Seite

Using with other equipment10

Note

• If you select a parameter other than “Auto”, make such a setting

that results in natural colour.

• If no image appears, specify another digital video signal type.

• For the digital video signal types to be specified, check the

operation manual that came with the connected equipment.

Specifying the type of audio signals

When you use the INPUT 1 or INPUT 3 HDMI terminal, select the

terminal for the desired input source, then perform the following

procedure to specify the type of audio signals.

1 Press HOME MENU.

2 Select “Option“ (

/

then ENTER).

3 Select “HDMI Input“ (

/

then ENTER).

4 Select “Audio“ (

/

then ENTER).

5 Select the type of audio signals (

/

then ENTER).

• If you select “Auto”, an attempt will be made to identify the type

of audio signals when audio signals are received.

6 Press HOME MENU to exit the menu.

Note

• If no sound is output, specify another audio signal type.

• For the audio signal types to be specified, check the operation

manual that came with the connected equipment.

• Depending on the equipment to be connected, you also need to

connect analogue audio cables.

Connecting control cords

Connect control cords between the plasma television and other

Pioneer equipment having the t logo. You can then operate the

connected equipment by sending commands from its remote

control unit to the remote control sensor on the plasma television.

After the CONTROL IN terminals have been connected, the remote

control sensors on the connected equipment do not accept

commands from the remote control units. Face the remote control

units to the remote control sensors on the plasma television when

operating the connected equipment.

Note

• Make sure that the power cord is removed from the power outlet

when making connections.

• Complete all component connections before making control

cord connections.

About SR+

The CONTROL OUT terminal on the rear of the plasma television

supports SR+ that allows linked operations with a Pioneer AV

receiver. SR+ presents functions such as the input switch linkage

operation function and the DSP surround mode display function.

For more information, see the instruction manual that came with

the Pioneer AV receiver supporting SR+.

Note

• While in connection through SR+, the volume on this system is

temporarily minimized.

• When making control cord connections, use the SR+ cable.

• When making control cord connections with one or more

pieces of Pioneer equipment, directly connect the plasma

television and the Pioneer amplifier that supports SR+. Do not

connect other equipment between them.

Item Description

Auto (default) Automatically identifies the input signals

Digital Accepts digital audio signals

Analogue Accepts analogue audio signals

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer PDP-4280XA Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info