Bedienungsanleitung Pioneer pdp-507xa (Seite 41 von 171) (Deutsch, Englisch, Französisch)

140856

Zoom out

Zoom in

Vorherige Seite

1/171

Nächste Seite

Useful Adjustment Settings

English

Sleep Timer

When the selected time elapses, the Sleep Timer automatically

places the system into the standby mode.

1 Press HOME MENU.

2 Select “Sleep Timer” ( / then ENTER).

3 Select the desired time ( / then ENTER).

• You can select from among “Off” (cancel), “30 min”, “60

min”, “90 min”, and “120 min”.

4 Press HOME MENU to exit the menu.

NOTE

• Five minutes before the selected time elapses, the remaining

time appears every minute.

• To check the remaining time, perform steps 1 and 2. After

checking the time, press HOME MENU to restore the

previous display.

• The SLEEP indicator on the front of the Plasma Television

lights up in orange when the Sleep Timer is set.

Using a password (AV mode only)

The Plasma Television provides the Child Lock function for

preventing children from watching inappropriate programmes.

You need to enter a password when watching programmes

with “Block” specified. Before the system is shipped, “1234” is

preset as the factory-default password. You can however,

change the password as you want.

When using the Home menu you select “Auto Installation”,

“Analogue TV Setup” or “Password”, a screen prompting

password entry appears to prevent others from changing the

programme settings at their choices.

Entering a password

If you select a channel blocked with Child Lock or if password

entry is requested when attempting to open the menu, enter a

password correctly.

1 Enter a correct 4-digit password using buttons 0 to 9.

NOTE

• If you fail password entry three times, “Invalid password.”

appears, and the menu is closed. In order to display the

password entry screen again to unlock the password, select

the blocked channel or open the menu again.

• If the password entry screen disappears before entry, you

may recall it by pressing ENTER.

Changing the password

Use the following procedure to change the password.

1 Press HOME MENU.

2 Select “Setup” ( / then ENTER).

3 Select “Password” ( / then ENTER).

• The password entry screen appears. Enter the current 4-

digit password using buttons 0 to 9.

4 Select “Change Password” ( / then ENTER).

5 Enter a 4-digit password to be newly set, using buttons

0 to 9.

6 Enter the same password that you have entered in step 5.

• If an unmatching password is entered, the operation

goes back to step 5 for reentry from the beginning.

• If you fail password change three times by entering

unmatching passwords, the menu is closed.

7 Press HOME MENU to exit the menu.

NOTE

• Take a note of the newly set password and keep it handy.

Please Input Your Password.

Change Password

Please Input New Password.

Reconfirm New Password.

PDP507XA.book Page 41 Tuesday, June 20, 2006 1:44 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer pdp-507xa Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer pdp-507xa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info