Bedienungsanleitung Pioneer pdp-507xa (Seite 45 von 171) (Deutsch, Englisch, Französisch)

140856

Zoom out

Zoom in

Vorherige Seite

1/171

Nächste Seite

Enjoying through External Equipment

English

NOTE

• If you select a parameter other than “Auto”, make such a

setting that results in natural colour.

• If no image appears, specify another digital video signal type.

• For the digital video signal types to be specified, check the

operation manual that came with the connected equipment.

To specify the type of audio signals:

When you use the INPUT 3 HDMI terminal, use the following

procedure to specify the type of audio signals.

1 Repeat steps 1 to 3 provided for “To activate the HDMI

terminal.”

2 Select “Audio” ( / then ENTER).

3 Select the type of audio signals ( / then ENTER).

• If you select “Auto”, an attempt will be made to identify

the type of audio signals when audio signals are

received.

4 Press HOME MENU to exit the menu.

NOTE

• The INPUT 4 HDMI terminal accepts only digital audio

signals.

• If no sound is output, specify another audio signal type.

• For the audio signal types to be specified, check the

operation manual that came with the connected equipment.

• Depending on the equipment to be connected, you also need

to connect analogue audio cables.

Using i/o link.A

The Plasma Television incorporates three typical i/o link.A

functions for smooth connections between Plasma Television

and other audiovisual equipment.

One Touch Play

While the Plasma Television is in standby mode, it

automatically turns on and plays back images from the

audiovisual source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR has the

WYSIWYR button, you can automatically start recording by

pressing the WYSIWYR button.

Preset Download

Automatically transfers channel preset information from the

tuner on the Plasma Television to the one on the connected

audiovisual equipment (e.g. VCR) via the INPUT 2 or 3 terminal.

To select the SCART terminal which is available for

i/o link.A:

Select the INPUT terminal to which the recording equipment

(e.g. VCR) you use has been connected.

1 Press HOME MENU.

2 Select “Setup” ( / then ENTER).

3 Select “i/o link.A” ( / then ENTER).

4 Select the desired parameter ( / then ENTER).

5 Press HOME MENU to exit the menu.

NOTE

• The i/o link.A functions work only when the audiovisual

equipment is connected to the INPUT 2 or 3 terminal on the

Plasma Television with i/o link.A via a fully wired 21-pin

SCART.

• Refer to operation manuals of each external equipment for

the details.

• If a SCART cable has been connected to the INPUT 3

terminal with the i/o link.A activated, input signals (other

than Component) are automatically identified and displayed.

If the i/o link.A has been deactivated, Video is always

selected for signals other than RGB because the system

cannot identify among RGB, Y/C (S-Video), and CVBS (Video)

signals; for example, receiving Y/C (S-Video) signals results

in monochrome display.

Item Description

Auto

(factory default)

Automatically identifies input audio signals.

Digital Accepts digital audio signals.

Analogue Accepts analogue audio signals.

Item Description

INPUT 2

(factory default)

INPUT 2 is available for i/o link.A.

INPUT 3 INPUT 3 is available for i/o link.A.

asma

(

rear v

)

SCART cable

(commercially available)

VCR or DVD/HDD

Recorder (DVR)

PDP507XA.book Page 45 Tuesday, June 20, 2006 1:44 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer pdp-507xa Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer pdp-507xa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info