Bedienungsanleitung Pioneer pdp-s37 (Seite 2 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

413666

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

English

Thank you for buying this Pioneer product.

Please read through these operating instructions before using

your speaker system so you will know how to make the

most of its performance. After you have finished reading the

instructions, put them away in a safe place for future

reference.

WARNING:

Handling the power cord on this product or cords associated

with accessories sold with the product will expose you to

lead, a chemical known to the State of California and other

governmental entities to cause cancer and birth defects or

other reproductive harm.

Wash hands after handling.

CAUTION

This product is designed exclusively for use with the Pioneer

Plasma Display. For more information on compatibility, please

consult with your nearest Pioneer authorized dealer or service

center.

BEFORE USE

÷ The nominal impedance of this speaker system is 8 ohms.

÷ In order to prevent damage to the speaker system

resulting from input overload, please observe the

following precautions:

÷ Do not supply power to the speaker system in

excess of the maximum permissable input. This can

result in damage or a possible fire hazard.

÷ When connecting or disconnecting pin-plugs, be

sure that amplifier power is OFF.

÷ When using a graphic equalizer to emphasize loud

sounds of a high frequency range, do not use

excessive amplifier volume.

÷ Do not force a low-powered amplifier to produce a

loud volume of sound (the amplifier’s harmonic

distortion will be increased, and you may damage

the speaker).

÷ Please handle the speakers with sufficient care, as

the grille net and the cabinet can become damaged

or broken when they are subjected to strong external

impacts.

÷ Placing a CRT computer screen or CRT monitor near to

the speakers may result in interference or color distortion.

If this happens, distance the monitor from the speakers.

Installation

÷ Consult your dealer if you encounter any difficulties

with this installation.

÷ Pioneer is not liable for any damage resulting from

improper installation, improper use, modification, or

natural disasters.

CHECKING THE ACCESSORIES

7 Speaker Cable × 2

Speakers Mounting Screw (M5 × 10 mm: Black) × 16

7 Speaker Mounting Bracket

For LEFT-TOP

For LEFT-BOTTOM

For RIGHT-TOP

For RIGHT-BOTTOM

7 Padding Strip × 2

(For Flush mounting)

When speakers are mounted Flush, they are affixed to

the side of the speaker as a buffer.

7 Operating Instructions × 1

There are two ways to mount these speakers,

either Air mount or Flush mount.

7 Air mount

There is a gap of air of about 15 mm between the speakers

and the display.

Speakers

7 Flush mount

The speakers are direct against the display.

Speakers

CAUTION:

Do not place force on the speakers’ front panel grille net,

or stick your finger or other object into the front of the

speaker, since you may damage the grille net or speaker

unit itself.

Do not use these speakers with anything other than the

Plasma Display. Doing so may result in damage or fire.

SRD1293A_01-07/En 6/16/05, 6:01 PM2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer pdp-s37 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info