Bedienungsanleitung Pioneer PDRW839 (Seite 40 von 52) (Englisch)

18156

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

8 Recording Other Sources

Digital synchro recording

If you have a CD, MD, DAT or DCC player connected to either of the

digital inputs of this recorder, you can make digital recordings

from it very simply using this mode.

Note that double speed recording is not possible in this mode.

1 Make sure that any discs loaded in

the CD changer are stopped.

2 Load a CD–R or CD–RW disc.

If it’s a blank disc, the display shows NEW DISC.

If the disc isn’t blank, use the DISPLAY button to check that

there's enough space on it for what you want to record.

3 Press INPUT to choose optical or

coaxial input.

Pressing INPUT repeatedly switches the active input:

ANALOG – OPTICAL – COAXIAL

The recorder's display indicates the current input.

4 If you want to adjust the recording

level:

Start playing a sample of the source material, then turn the

REC VOL knob to adjust the recording level (clockwise to

increase or anticlockwise to reduce). Use the level meter to

guage the the best recording level (the loudest sounds in the

source should just reach 0dB on the meter; the red segments

in the level meter should not light at all).

• Push the REC VOL knob for 3 seconds to reset the recording

level. This means that the recording level will be the same as

the source.

5 Make sure that the source is not

playing, then press SYNCHRO.

Digital synchro recording will not work if the source is

already playing!

Pressing SYNCHRO repeatedly switches the synchro mode:

• 1-track synchro – recorder stops recording when it

encounters a new track number/start ID on the source or 2

seconds of silence.

• all-track synchro – recorder stops recording when it

detects more than 5 seconds of silence in the source

material.

• all-track with finalize – as all-track synchro, but the

recorder automatically finalizes the disc after recording.

The SYNCRO indicator and SYNC(-1) will start to blink

when the recorder is ready.

To cancel recording here, press 7.

6 Play the source.

The recorder starts recording automatically.

Press DISPLAY to switch displays during recording.

7 The recorder goes into record-pause

after recording.

Be careful: In all-track synchro mode, if the recorder

detects another signal, recording starts again.

• If you're using all-track synchro with finalize, the recorder

will start finalizing the disc after a minute of silence.

• Press 7 to finish the recording before ejecting the disc.

If you find that digital synchro recording does not seem

to work, see Digital synchro recording troubleshooting on

page 48 for possible remedies.

- COMPACT DISC MULTI CHANGER

COMPACT DISC DIGITAL RECORDER



◊ÛB¿ˆ˘≤/

COMPACT DISC RECORDER / MULTI-CD CHANGER

Legato Link Conversion

CD TEXT

REC VOL

SYNCHRO

PUSH ENTER

OPEN/CLOSE

¶

INPUT

DISPLAY

CHARACTER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer PDRW839 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer PDRW839

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info