Bedienungsanleitung Pioneer PL-30-K (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

574465

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Operation

Adjusting the stylus pressure

1 Return the tone arm to the arm rest.

2 Match the “0” on the stylus pressure adjustment ring to the center line of the arm rear

shaft.

While using your finger to hold the balance weight to keep it from moving, turn only the stylus pressure adjust-

ment ring so that the number “0” comes to the black center line of the tone arm rear shaft.

3 Adjust the stylus pressure.

Turn the balance weight to adjust to the appropriate stylus pressure value for your cartridge.

! When turning the balance weight, the stylus pressure adjustment ring turns together. While observing the

adjustment ring, adjust the stylus pressure to the appropriate value.

! The appropriate stylus pressure for the included cartridge is 3.5 g. Set to “3.5”.

Adjusting anti-skating

This adjustment is made to prevent stylus jumping.

1 Match to the same scale position as the stylus pressure value.

2 Turn the [ANTI-SKATING] dial to match the reference mark to the same value as the

cartridge stylus pressure value.

Connecting your equipment

! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing

connections.

! Refer to the operating instructions for the component to be connected.

! Connect the power cord after all the connections between devices have been completed.

Descriptions of terminals

PHONO LINE

AC IN

31 2

1 Equalizer switch

Move this switch to appropriate position according to the audio input terminal of the pre-main amplifier or

other component.

2 RCA output terminals

Connects to the audio input terminal of the pre-main amplifier or other component.

3 AC IN terminal

Connects to a power outlet using the included power cord. Wait until all connections between the equipment

are completed before connecting the power cord.

! Be sure to use the included power cord.

Connecting to a pre-main amplifier and component

1 Set the equalizer switch to appropriate position.

PHONO: When connecting to the PHONO input terminal (the built-in equalizer of record player is not used.)

LINE: When connecting a terminal other than the PHONO input terminal (the built-in equalizer of record player is

used.)

2 Connect the RCA output terminal to the input terminal of the pre-main amplifier or other

component.

3 Connect the power cord.

Connects to a power outlet using the included power cord. Wait until all connections between the equipment are

completed before connecting the power cord.

! Before connecting to the outlet (AC outlet) mounted on the connected equipment, check the wattage dis-

played on the outlet. (This unit consumes 2 W of power.)

! If the player starts operating when the power cord is plugged in, press the [STOP] button.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer PL-30-K Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info