Bedienungsanleitung Pioneer PLX-500 (Seite 14 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

707105

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Operation

Turning the power on

1 Make all the connections, then plug the power cord

into a power outlet.

= Connections (p. 12 )

2 Change the [POWER] switch to the [ON] side to turn

on the power of the unit.

This unit’s indicators light and the power turns on.

Turning the power off

Change the [POWER] switch to the [OFF] side to turn off

the power of the unit.

This unit’s power turns off.

Playback

Prepare as follows.

! Place a record on the turntable.

! Remove the stylus cover and arm clamper.

1 Change the [POWER] switch to the [ON] side to turn

on the power of the unit.

2 Select the rotation speed to match the record to be

played by pressing a speed change button.

3 Press the [START/STOP] button.

The turntable rotates.

4 Pull up the lifter lever and move the tone arm onto

the record.

5 Push down the lifter lever.

The tone arm slowly descends and playback begins.

Pausing playback

Pull up the lifter lever.

The stylus of the cartridge lifts away from the record.

! To resume playback, push down the lifter lever.

Finishing playback

1 Pull up the lifter lever to return the tone arm to the

arm rest and then push down the lifter lever.

2 Press the [START/STOP] button.

The turntable stops smoothly.

3 Change the [POWER] switch to the [OFF] side to turn

off the power of the unit.

Use the arm clamper to secure the tone arm.

To protect the stylus tip, attach the stylus cover.

Close the dust cover.

Adjusting the pitch

Move the [TEMPO] slider forward or backward.

Moving the slider forward increases the rotation speed and moving it

backward decreases the rotation speed.

! When the [TEMPO] slider is at the center, the indicator lights in

yellow-green and the rotation speed becomes the specified rpm

(33 1/3 rpm, 45 rpm, or 78 rpm).

! The scale of the [TEMPO] slider is a rough value. Please use it as a

guide.

! You can confirm that the rotation speed has become the specified

rpm by looking at the four rows of strobe patterns inscribed around

the turntable.

Strobe pattern

①

②

③

④

1 When the strobe pattern appears stopped, 33 1/3 rpm (50 Hz power

supply)

2 When the strobe pattern appears stopped, 45 rpm (50 Hz power

supply)

3 When the strobe pattern appears stopped, 33 1/3 rpm (60 Hz power

supply)

4 When the strobe pattern appears stopped, 45 rpm (60 Hz power

supply)

! A strobe illuminator (red LED light) is used to illuminate the strobe

pattern of this unit. When checking the pitch, always use the strobe

illuminator light.

Displaying a record jacket

Place the record jacket behind the stoppers attached to the dust cover

as shown in the figure.

StoppersRecord jacket

! Do not place anything other than a record jacket.

! Place the record jacket secured behind the stoppers properly.

! When using this feature during playback, be careful that the record

jacket does not fall. The record or stylus may be damaged.

! Be careful not to close the dust cover while a record jacket is placed

on it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer PLX-500 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info