Bedienungsanleitung Pioneer RCS-606H-S (Seite 32 von 152) (Englisch)

573927

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Surround sound settings

Dynamic Range Control

When watching Dolby Digital or DTS material at low

volume, low level sounds—including some of the

dialog—can be difficult to hear properly. Using one of the

Dynamic Range Control (DRC) settings can help by

bringing up the low level sounds, while controlling high

level peaks.

Dynamic Range Control works only with Dolby Digital

soundtracks and some DTS soundtracks.

1 Press SETUP.

2 Use the / buttons to select DRC, then press

ENTER.

3 Use / to select a setting.

Select one of the following:

• DRC OFF (default) – No dynamic range adjustment

(use when listening at higher volume)

• DRC MID – Mid setting

• DRC HIGH – Dynamic range is reduced (loud sounds

are reduced in volume while quieter sounds are

increased)

4 Press ENTER to exit.

Dual mono setting

Specifies how dual mono encoded Dolby Digital or DTS

soundtracks should be played. You can also use this

setting to switch the audio channel on DVD-RW discs

recorded with bilingual audio.

1 Press SETUP.

2 Use the / buttons to select DUALMONO,

then press ENTER.

3 Use / to select a setting.

Select one of the following:

• CH1 MONO (default) – Only channel 1 is played

• CH2 MONO – Only channel 2 is played

• CH1/CH2 – Both channels are played through the

front speakers

4 Press ENTER to exit.

Adjusting the channel levels using

the test tone

If you prefer, you can set the channel levels using a test

tone as a reference, rather than playing a source (see

Channel level setting on page 31). A test tone is played

through each speaker in turn, allowing you to adjust the

level as it plays.

Note that the channel level settings for stereo sources

are independent of the settings for surround sound

sources.

1 Press SURROUND to select the Auto listening

mode.

• If you want to set the channel levels for stereo (two

channel) playback, select the STEREO listening

mode.

2 Press TEST TONE.

The test tone is output from each speaker in turn.

3 While a test tone is playing, use the / buttons

to adjust that channel level.

The aim is to adjust the levels so that you hear the test

tone at the same volume from each speaker. You can

adjust the level of each channel by ± 10 dB.

• You can adjust the overall volume of test tone output

using the VOLUME +/– buttons (this does not affect

the channel level settings).

• If the system is in Stereo or Virtual mode, you will not

be able to adjust the center or surround channels.

• Because of the ultra low frequencies the subwoofer

produces, it may sound quieter than it really is. We

suggest adjusting the subwoofer level while listening

to a source. See the method described in Channel

level setting on page 31.

Note

1 This setting is effective for the speaker output. A similar adjustment feature is available on the DVD recorder—see Audio DRC on page 131.

2 This setting is effective for the speaker output. A similar adjustment feature is available on the DVD recorder—see Switching audio channels

on page 94.

MCACC

SURROUND

ADVANCED SOUND TV/DVD

SLEEP

INPUT

MAIN SUB

CHANNEL

TV CONTROL

RDS DISP

AXD7442

VOLUME DISPLAY

CLEAR

JUKE BOX

TEST TONE VIDEO IN

ONE TOUCH COPY

/TUNE

ENTER

/ /

TIMER REC REC MODE



/TUNE

–



123

456

––



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-606H-S Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-606H-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info