Bedienungsanleitung Pioneer RCS-606H-S (Seite 85 von 152) (Englisch)

573927

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Recording

English

4 For Video mode and DVD+R/+RW discs

only, select a title menu style, then select ‘Yes’ to

start finalization or ‘No’ to cancel.

The menu you select will be the one that appears when

the ‘top menu’ (or ‘menu’ for a DVD+R/+RW) is selected

on any DVD player.

• Discs recorded partially or fully on the Pioneer DVR-

7000 DVD recorder do not support this feature. These

discs will have only a text title menu when finalized on

this recorder.

5 The recorder will now start finalizing the disc.

During finalization:

• If the finalization process of a DVD-RW or DVD+R/

+RW disc is going to take more than around four

minutes, you can press ENTER to cancel. Around

four minutes before completion, the option to cancel

disappears.

• You can’t cancel the finalization of a VR mode DVD-R

disc.

• How long finalization takes depends on the type of

disc, how much is recorded on the disc and the

number of titles on the disc. A disc recorded in VR

mode can take up to one hour to finalize. Video mode

DVD-R/-RW and DVD+R/+RW discs can take up to

20 minutes.

Initializing recordable DVD discs

DVD-R/-RW discs can be initialized for either Video mode

recording or VR mode recording.

When you first load a blank DVD-RW or DVD+RW disc,

the recorder initializes it for recording automatically. By

default, blank DVD-RW discs are initialized for VR mode

recording. See DVD-RW Auto Init. on page 132 if you want

to change the default to Video mode.

DVD-R discs are ready for Video mode recordings out of

the box; if you want to use a DVD-R for VR mode

recording, you must initialize it before recording anything

on the disc.

DVD+RW and DVD-RAM discs can also be initialized in

order to erase the contents of the disc.

Important

• Initializing a DVD-RW, DVD+RW or DVD-RAM disc

will erase everything recorded on it. Make sure there

is nothing on the disc that you want to keep!

• You may not be able to re-initialize a DVD-RW disc in

a different format if it was originally initialized on an

older DVD recorder.

• Once initialized for VR mode recording, you can’t re-

initialize a DVD-R back to Video mode.

1 Select ‘Disc Setup’ from the Home

Menu.

2 Select ‘Initialize’ > ‘Video Mode’, ‘VR

Mode’ or ‘Initialize DVD+RW’.

3 Select ‘Start’.

It takes about 30 seconds to initialize the disc (except

DVD-RAM discs, which can take up to 1 hour).

Note

1.If a disc was previously finalized on an older DVD recorder, you may not be able to re-initialize and/or initialize it for Video mode recording.

ENTER

Finalize

DVD-R DVD-RW DVD+RW DVD-RAM

HOME MENU

ENTER

Basic

Initialize

Finalize

Optimize HDD

Disc Setup

VR Mode

Video Mode

Initialize DVD+RW

Start

Initialize

ENTER

Initializing Disc

1 min left

Pr 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-606H-S Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-606H-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info