Bedienungsanleitung Pioneer RCS-606H-S (Seite 143 von 152) (Englisch)

573927

143

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Additional information

143

English

On-screen displays and recorder displays

The table below shows a list of error messages that you may encounter when using the recorder and an explanation

of their meaning.

Message Explanation/Action

• Initializing disc. Please wait a moment. When you load a blank DVD-RW or DVD+RW disc, the recorder

automatically initializes it.

• Incompatible region number. The disc loaded has an incompatible region number for the recorder and

so will not play.

• Cannot record any more titles.

• No more space for ﬁle management

data.

The disc control data limit has been reached, or the maximum number of

chapters and/or titles has been reached. Erase titles/chapters or

combine chapters.

• This disc cannot be recorded. Undo the

ﬁnalization.

The disc was ﬁnalized on a non-Pioneer DVD recorder. Undo the

ﬁnalization in order to recording/editing.

• Cannot play this disc.

• This disc cannot be recorded.

• Cannot read the CPRM information.

• Could not record the information to the

disc.

• Cannot edit.

• Could not initialize disc.

• Could not complete ﬁnalization

successfully.

• Could not undo ﬁnalization successfully.

• Could not successfully unlock the disc.

The disc may be dirty or damaged. Take out the disc, clean it and retry. If

the error persists, use a new disc. If the error appears even with a new

disc, please consult a Pioneer Service Center.

• Incompatible or unreadable disc. The disc loaded is a playback-only disc type. This display may also appear

if the disc is dirty or damaged.

• Cannot record to a disc that is not CPRM

compatible.

• Cannot record this content using Video

mode recording.

• This video cannot be recorded to

DVD+R/+RW.

The video source is copy-once protected. Use a VR mode DVD-R/-RW

disc with CPRM for recording.

• This content is copy protected. The video source is copy-protected and cannot be recorded.

• Incorrect CPRM information. The recorder could not read the CPRM information. The recorder may be

damaged—please consult a Pioneer Service Center.

• Repairing disc.

• Repairing the HDD.

During recording, the power was cut. This display appears when the

power is restored.

• Could not repair the disc. The recorder was unable to repair the disc after a power cut. The

contents of the recording will be lost.

• Overheating has stopped operation.

Press DISPLAY to clear message.

The internal temperature of the recorder has exceeded the operating

limit. If this message reappears, please contact a Pioneer authorized

service center.

• There is no DV input or the input signal

is unrecordable.

No signal was detected at the DV IN jack. This may appear if a blank

section of DV tape is playing in the connected camcorder.

• HDD optimization is recommended. This

can be done using Disc Setup.

The HDD should be optimized (basically, HDD housekeeping) to

maintain playback and recording performance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-606H-S Seite 143

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-606H-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info