Bedienungsanleitung Pioneer RCS-656HX (Seite 9 von 156) (Englisch)

573928

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Connecting up

1 Connect the DVD recorder to the receiver

subwoofer.

a. Plug the control cable into the CONTROL OUT jack

on the rear of the receiver subwoofer.

Plug the other end of the cable into the CONTROL IN

jack on the rear of the DVD recorder.

b. Plug the coaxial cable into the DIGITAL AUDIO

INPUT (DVD/DVR 1) jack on the rear of the receiver

subwoofer.

Plug the other end of the cable into the COAXIAL

DIGITAL OUT jack on the rear of the DVD recorder.

2 Connect the display unit to the receiver subwoofer.

Plug the L-shaped end of the display cable into the

connector on the rear of the display unit, then plug the

other end of the display cable into SYSTEM CONNECTOR

jack on the receiver subwoofer.

3 Assemble the AM loop antenna.

a. Bend the stand in the direction indicated by the arrow.

b. Clip the loop onto the stand.

c. If you want to fix to a wall or other surface, perform

step b after first securing the stand with screws.

It is recommended that you determine the reception

strength before securing the stand with the screws.

4 Connect the AM and FM antennas

a. Connect one wire of the AM loop antenna to each AM

antenna terminal

For each terminal, press down on the tab to open;

insert the wire, then release to secure.

b. Push the FM antenna

plug onto the center pin of the

FM antenna socket.

5 Connect each speaker.

• Each speaker cable has a color-coded connector at

one end and two wires at the other end.

• Twist and pull off the protective shields on each wire.

• Connect the wires to the speaker. Match the colored

wired with the color-coded label (model label), then

insert the colored wire into the red (+) side and the

other wire into the black (–) side.

Note that unless the control cable is connected,

you can’t use the remote control with the DVD recorder.

a b c

Note

1• Keep antenna cables away from other cables, the display unit, receiver subwoofer and DVD recorder.

• If reception with the supplied antenna is poor, see Improving poor FM reception and Improving poor AM sound on page 26 or Connecting

external antennas on page 30.

2• Don’t let it come into contact with metal objects and avoid placing near computers, television sets or other electrical appliances.

• The signal earth () is designed to reduce noise that occurs when an antenna is connected. It is not an electrical safety earth.

• If radio reception is poor, you may be able improve it by re-inserting each antenna wire into the opposite terminal.

• For best reception, do not untwist the AM loop antenna wires or wrap them around the loop antenna.

3 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.

Color-coded wire

(Connect to speaker)

Color-coded connector

(Connect to rear panel)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info