Bedienungsanleitung Pioneer RCS-656HX (Seite 28 von 156) (Englisch)

573928

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Surround sound settings

Chapter 5

Surround sound settings

Important

• To access green functions on the remote, move the

slider switch from MAIN to SUB.

Using the Setup menu

From the Setup menu you can access all the surround

sound settings of the system

, including channel levels,

speaker distances, dynamic range adjustment and dual

mono audio playback.

Use the following buttons to use the Setup menu.

Channel level setting

The Auto MCACC feature (see page 21) should give you

the best surround sound setup. However you may find

that by further adjustment of the channel levels you can

improve the surround sound in your listening room.

This method of setting the channel levels allows you to

listen to a source and adjust the levels of each playback

channel. Note that the channel level settings for stereo

playback are independent of the settings for surround

sound playback.

A further method of setting the channel levels is to use

the test tone method. See Adjusting the channel levels

using the test tone on page 29 for more on this.

1 Select stereo or multichannel playback for a source.

2 Press SETUP.

3 Use the / buttons to select CH LEVEL, then

press ENTER.

4 Use / to select a channel; / to adjust the

level of that channel.

• You can adjust the level of each channel by ± 10 dB.

• If the system is in Stereo or Virtual mode, or a stereo

source is playing in Auto mode, you will not be able

to adjust the center or surround channels.

5 Press ENTER when you’re finished.

• If you use the Auto MCACC feature again, it will

overwrite the settings you have made here.

Speaker distance setting

The Auto MCACC feature (see page 21) should give you

the best surround sound setup. However you may find

that by further adjustment of the speaker distance

settings you can improve the surround sound in your

listening room.

Set the distance of each speaker from your normal

listening position.

1 Press SETUP.

2 Use the / buttons to select DISTANCE, then

press ENTER.

3 Use / to select a speaker; / to adjust the

distance.

Adjust the following speakers:

• L – Front left speaker

• C – Center speaker

• R – Front right speaker

• SR – Surround right speaker

• SL – Surround left speaker

• SW – Subwoofer

Each speaker can be adjusted from 0.3 m to 9.0 m.

4 Press ENTER when you’re finished.

• If you use the Auto MCACC feature again, it will

overwrite the settings you have made here.

Note

1 There are other settings you can adjust from the Setup menu; these are explained in Listening to the radio on page 26 and

Additional information

on page 33.

SETUP

MCACC

SURROUND

ADVANCED SOUND TV/DVD

SLEEP

INPUT

MAIN SUB

CHANNEL

RDS DISP

AXD7442

VOLUME DISPLAY

CLEAR

JUKE BOX

TEST TONE VIDEO IN

ONE TOUCH COPY

ENTER

/ /

TIMER REC REC MODE





123

456

––



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info