Bedienungsanleitung Pioneer RCS-656HX (Seite 61 von 156) (Englisch)

573928

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Getting started

About EPG download

• EPG data can only be received when the recorder is

in standby. (When not using the recorder, therefore,

please switch it into standby.) If you’re using an

external receiver, leave this on when EPG data is

downloading.

• If you cannot receive any of the host channels (see

the above table) then you won’t be able to use the

GUIDE Plus+ system. In this case do not set the

postal code (or set Country to Other) in the GUIDE

Plus+ setup screen. (When GUIDE Plus+ service

starts in your area, set the postal code again.)

If digital broadcasts start in your area, please set the

EPG Type Select setting in the Initial Setup menu to

Digital EPG.

• Even if you can’t use the EPG functions where you

live, you can still set ShowView timer recordings and

manual recordings — see Setting a manual recording

on page 70.

• The front panel display shows EPG when receiving

data. If you power on the recorder during an EPG

download, the download is canceled.

• EPG data may be received several times a day. All

updates are automatic.

• When downloading EPG data, the recorder may

sound as though it is on. This is normal.

Checking the downloaded data the

following day

1 Display the GUIDE Plus+ screen.

You should see a grid filled with channel logos and TV

listings information. Use the / buttons to review the

list. If you notice that there are channels missing, or that

there are channels in the list that you don’t get, go to the

Editor screen:

• Press  repeatedly until the Menu bar is highlighted.

• Press  until Editor is highlighted. The main area of

the screen now shows a list of channels. Those that

are turned ON are displayed in the grid; those that

are OFF are hidden. Use the /// buttons to

move down the list and turn channels ON or OFF as

necessary.

• For any channel that you turn ON, the GUIDE Plus+

system will need to know how it is received (the

source) and on which program number. The source

may be the built-in tuner of this recorder, or an

external receiver. The program number is the number

on which the channel can be found on its receiving

device/source. The entry in the Editor screen must

match this number for correct recording of that

channel.

• The above is especially important for the ‘host

channel’. Please make sure that the host channel is

always switched ON.

2 Change the program numbers as you like.

Changing the program numbers allows you to decide the

order in which the channels change when stepping

through them sequentially. You can do this to group

certain channels together, for example.

3 When you’re done, press the BLUE Action button

(Home) to get back to the GUIDE Plus+ home screen.

• You can find detailed information on using the GUIDE

Plus+ system in the following chapter.

GUIDE

SET UP

MCACC

ADVANCED

TEST TONE

SR+/TUNE+

ENTER

/TUNE–

/ST– /ST+

123

456

D. TV 001

D. TV 002

D. TV 003

D. TV 004

D. TV 005

Ext. Rec. 1 007

D. TV 006

D. TV 014

D. TV 017

BBC1

Name On/Off Source Prog. No.

BBC2 On

ITV On

CH4 On

CH5 On

BBC3 On

ITV2 On

E4 Off

UKGOL On

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info