Bedienungsanleitung Pioneer RCS-656HX (Seite 71 von 156) (Englisch)

573928

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Using the GUIDE Plus+™ electronic program guide

Important

•A timer recording can’t be set if there are already 32

timer programs waiting to be recorded.

• Timer recording will not start if:

– The recorder is already recording.

– A disc is being initialized, finalized or unfinalized.

• Timer recording will start when the operation

preventing timer recording has finished.

• The timer indicator ( ) lights in the front panel

display when the timer is active. If the indicator is

blinking it means that (for a DVD timer recording)

there is no disc loaded, or the disc loaded is not

recordable (for an HDD timer recording it means that

the HDD is not recordable).

• Approximately two minutes before a timer recording

is set to start, the recorder will go into timer recording

standby. In timer recording standby you cannot use

some functions.

• The maximum length for timer recordings made to

the HDD is 24 hours. However, because one title

(HDD) is limited to 12 hours, recordings over 12

hours will be spread over two titles. Note that there

will be a break in the recording of a few seconds

between titles.

• VPS/PDC works only with analog stations; it does not

work with digital TV stations.

• VPS/PDC may not work with all broadcast stations in

your country/area. Check with the stations for

compatibility.

• The hours between 3:00 and 5:00 in the morning are

used by the GUIDE Plus+ system to download

program information. During these times, VPS/PDC

may not work reliably; leave VPS/PDC off if you set a

timer recording for these times.

Extending a timer recording in progress

You can extend a timer recording beyond the

programmed end time. This can be useful if a broadcast

program overruns, for example.

Canceling or extending the timer

1 Press and hold for three seconds during a

timer recording.

Recording continues, but the timer indicator disappears

from the front panel display indicating that the timer has

been canceled.

2 Press repeatedly to extend recording in 30

minute blocks.

Stopping a timer recording

1 Press during a timer recording.

2 Select ‘Yes’ to confirm.

Preventing use of the recorder before a timer

recording (child lock)

You can make all the front panel and remote control

buttons inoperative using the child lock feature. This is

useful when you set a timer recording and want to make

sure that the timer settings are not changed before

recording has finished.

1 If the recorder is on, switch it into standby.

2[Front panel] Press and hold for three seconds

to lock the controls.

The front panel display briefly shows LOCK. If any buttons

are pressed on the remote or front panel, LOCK is briefly

displayed again.

• To unlock the recorder, press and hold  STOP on

the front panel (while the recorder is stopped) for

three seconds until the display shows UNLOCK.

Frequently Asked Questions

• Even though the timer is set, the recorder doesn’t start

recording!

Check that the disc loaded or HDD is recordable, not

locked (see Lock Disc on page 124), and that there are

fewer than 99/999 titles already on the DVD/HDD.

• The recorder won’t let me enter a timer program! Why

not?

You can’t enter a timer program if the clock isn’t set.

• What happens when two or more timer programs

overlap?

Basically, the program with the earlier recording start

time has priority. However, the recorder will start

recording the program with the later start time after

the earlier program is finished. If two programs have

the same times (but different channels, for example),

the program set most recently takes priority.

If VPS/PDC is active for two timer programs that are

programmed to start at the same time, then the

program that actually starts first takes priority.

REC

STOP REC



ENTER

RECORDER





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info