Bedienungsanleitung Pioneer RCS-656HX (Seite 82 von 156) (Englisch)

573928

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Recording

Setting the picture quality/recording

time

Before starting a recording, you will usually want to set

the picture quality/recording time. There are six standard

settings available, which allow you to choose a balance

between picture quality and recording time.

When Manual Recording is set to On (see Manual

Recording on page 135), a further option will be available

(MN1 to MN32 or LPCM, depending on what you set).

When recording to DVD+R/+RW, SLP is the longest

recording time available. If you select SEP or MN1 to

MN3, the recording mode will automatically revert to

SLP.

• Press repeatedly to select the recording

quality.

• XP – High quality setting, gives about one hour of

recording time on a DVD disc.

• SP (Standard Play) – Default quality, used for most

applications, gives about two hours of recording time

on a DVD.

• LP (Long Play) – Lower video quality than SP, but

doubles the recording time on a DVD to about four

hours.

• EP (Extended Play) – Lower quality than LP, but gives

about six hours of recording time on a DVD disc.

• SLP (Super Long Play) – Lower quality than EP, but

gives about eight hours of recording time on a DVD

disc.

• SEP (Super Extended Play) – Lowest video quality but

gives about ten hours of recording time on a DVD

disc.

• MN1 to MN32 / LPCM

– Manual / Linear PCM

(available only when manual recording is on)

The setting is indicated in the front panel display, and

shown on-screen together with the recording time for a

blank recordable disc. If a recordable disc is loaded, the

approximate remaining recording time for that disc is

also shown. (Note that if the On Screen Display setting

(see On Screen Display on page 137) is Off then this

information is not displayed.)

Basic recording from the TV

Basic recording from the TV involves just setting the

channel to record, choosing whether to record to the

HDD or a DVD and selecting the recording quality.

1 Select the HDD or DVD for recording.

• If you’re recording to DVD, load a recordable disc (if

you load a new blank DVD-RW or DVD+RW disc, the

recorder takes a short while to initialize the disc).

•

If you want to record a VR mode DVD-R or a Video

mode DVD-RW, you must initialize it before proceeding

(see Initializing recordable DVD discs on page 87).

2 Press to switch between D.TV (digital)

and A.TV (analog).

3 Select a TV channel to record.

The front panel display shows the channel number, or

channel name if it’s available:

• While the recorder is stopped, you can also use the

number buttons on the remote to select the channel

(For channel 24, press 2, 4 then ENTER).

•

If the recorder is stopped, you can also use the CH +/–

buttons on the front panel to select the channel

number.

4 Set the picture quality/recording time.

• See Setting the picture quality/recording time on

page 82 for detailed instructions.

If you’re recording from the A.TV tuner,

select the audio channel to record.

See Changing A.TV audio channels on page 81 for more

on this.

• When recording in VR mode, if a broadcast is

bilingual, both audio channels are recorded, allowing

you to switch the audio channel on playback. The

only exception to this is when the picture quality is set

to LPCM, in which case you do need to select the

audio channel before recording.

Note

1 Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality. When recording a bilingual broadcast, select which audio chan-

nel to record (see Bilingual Recording on page 133).

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD

REC MODE

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD

HDD/DVD

A.TV/D.T

MAIN SUB

–

CHANNEL





A.TV Channel preset

REC MODE

AUDIO

MAIN SUB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info