Bedienungsanleitung Pioneer RCS-656HX (Seite 98 von 156) (Englisch)

573928

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Playing and recording from a DV camcorder

Chapter 9

Playing and recording from a DV

camcorder

You can play back and record video from a DV camcorder

connected to the DV IN jack on the front panel of this

recorder.

Important

• If you connect a second recorder using a DV cable,

you cannot control the second unit from this one.

•

You can’t control this unit remotely from a component

connected to the DV IN jack.

Playing from a DV camcorder

1 Make sure your DV camcorder is connected to

the front panel DV IN jack.

2 From the Initial Settings menu, check that the DV

audio input is setup as you require.

See DV Input on page 133 for more on this.

• Check also that the Audio In settings for External

Audio and Bilingual Recording are as you want

them (see Audio In on page 133).

3 Select ‘DV’, then ‘DV Video Playback’

from the Home Menu.

4 Start playback on the camcorder.

Images from the camcorder should appear on your TV.

•

To record the incoming video, press HDD/DVD to select

the HDD or a DVD for recording, then press ì REC.

Press



STOP REC to finish recording.

If there is no signal from the device connected to the

DV jack, or the signal is copy-protected, recording

will pause. It will automatically restart once there is a

recordable signal.

• The recorder will only start recording from the DV IN

jack if there is a valid signal. Recording will pause if

the signal is interrupted during recording.

• If your source is copy-protected using Copy Guard,

you will not be able to record it. See Restrictions on

video recording on page 79 for more details.

Recording from a DV camcorder

Using the recorder’s remote, you can control both the

camcorder and this recorder.

Important

• The source signal must be DVC-SD format.

• Some camcorders cannot be controlled using this

recorder’s remote.

• You can’t record date and time information from DV

cassette.

• During DV recording, if a part of the tape is blank, or

has copy-protected material on it, this recorder will

pause recording. Recording will restart automatically

when there is a recordable signal. However, if there is

more than 10 seconds of blank tape, this recorder will

stop recording and the camcorder should stop

(depending on the camcorder).

For best results when recording from a DV camcorder to

this recorder, we recommend cueing the camcorder to

the place you want to start recording from and setting the

camcorder to play-pause.

1 Make sure your DV camcorder is connected to

the front panel DV IN jack.

Also, set the camcorder to VTR mode.

2 Set the recording quality.

• See Setting the picture quality/recording time on

page 82 for detailed information.

3 From the Initial Settings menu, check that the DV

audio input is setup as you require.

See DV Input on page 133 for more on this.

• Check also that the Audio In settings for External

Audio and Bilingual Recording are as you want

them (see Audio In on page 133).

4 Select ‘DV’, then ‘Copy from a DV

Source’ from the Home Menu.

• DV recording only works when the DV camcorder is

in VTR mode with a tape loaded.

5 Select ‘Record to Hard Disk Drive’ or

‘Record to DVD’.

HOME MENU

REC MODE

HOME MENU

ENTER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info