Bedienungsanleitung Pioneer RCS-656HX (Seite 146 von 156) (Englisch)

573928

146

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Additional information

146

Timer program doesn’t record

successfully

• When setting the recording channel, make sure you set the recorder’s built-in TV

tuner, not the TV’s built-in tuner.

• When recording to a Video mode disc, programs that are copy-once protected

cannot be recorded. Use a VR mode formatted disc for copy-once material (page 79).

• Two timer programs may have overlapped, in which case only the earlier one will

record completely.

• The power may have failed during recording.

After brieﬂy unplugging or after

a power failure the front panel

display shows ‘--:--’

• A backup battery inside the recorder keeps the clock and other settings from being

reset when there is no power to the recorder. After unplugging or a power failure, the

battery keeps all settings for a period of several minutes. Reset the clock and other

recorder settings to use the recorder again.

Front panel display shows

‘LOCK’ when a button is pressed

• The Child Lock is on; turn off in order to use the recorder (page 71).

Can’t use One Touch Copy (HDD

to DVD)

• Make sure that there is a recordable DVD-R/-RW loaded with some free space for

recording and fewer than 99 titles already on the disc. Also make sure that for a Video

mode disc or a DVD+R, the disc isn’t ﬁnalized.

• Make sure there is a recordable DVD+R/+RW loaded with some free space for

recording and fewer than 49 titles already on the disc.

• If you delete a title from a DVD+R/+RW disc, the number of remaining recordable

titles may not decrease.

• Further recording is not possible on a ﬁnalized DVD+R. Check that there isn’t a

disc menu on the disc you’re trying to use.

•

If the title currently playing contains material that is copy-once protected, One Touch

Copy will not work.

• One Touch Copy can’t be used for titles over 8 hours long when copying to DVD+R/

+RW (though you can use a DVD+R DL).

• One Touch Copy can’t be used for MN1 to MN6, SEP, SLP or EP titles when copying

to DVD+R/+RW.

• One Touch Copy doesn’t work if the recorder is already recording to DVD.

Can’t use One Touch Copy (DVD

to HDD)

• Make sure that there is space available on the HDD and that there are fewer than

999 titles on the HDD.

• One Touch Copy doesn’t work if the recorder is already recording to the HDD.

The picture freezes and the front

panel and remote control

buttons stop working

• Press  STOP then try restarting playback.

• Press the front panel  STANDBY/ON button to switch the power off, then switch

back on and restart playback. If the power fails to switch off, press and hold

 STANDBY/ON for 5 seconds until the power switches off.

A device connected via USB does

to function.

• Check that it is a device that may be connected to this unit (digital camera, USB

memory, memory card reader or printer).

• Use a USB cable less than 5 m in length.

• Check that the USB cable is inserted fully.

• Check that the USB device is powered on.

• Only the ﬁrst digital camera, USB memory or memory card reader connected is

readable by this unit. Unplug multiple devices and connect the device you want to

use ﬁrst.

Problem Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 146

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info