Bedienungsanleitung Pioneer RCS-656HX (Seite 133 von 156) (Englisch)

573928

133

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

The Initial Setup menu

133

Audio In

NICAM Select NICAM • Record the NICAM audio in a NICAM broadcast.

Regular Audio Record the non-NICAM audio in a NICAM broadcast. (You can still switch

the audio to record using the AUDIO button before recording.)

Analog Tuner Level Normal • Standard setting.

Compression

Use if the audio level from the built-in tuner is excessive, causing distortion.

External Audio Stereo • Select if the audio from the currently selected external input is standard

stereo.

Bilingual Select if each channel carries a separate soundtrack.

When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or

bilingual. This has priority over the setting you make here.

Bilingual Recording A/L • Record the left (A) channel of a bilingual source when recording to HDD

with HDD Recording Format set to Video Mode On, to DVD in Video mode

or in LPCM mode, from an external source.

B/R As above, but for right (B) channel recording.

When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except

in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.

DV Input Stereo 1 • Select to use the ‘live’ audio track (recorded during the video shoot) from

a camcorder that supports two stereo audio tracks.

Stereo 2 Select to use the overdubbed audio track from a camcorder that supports

two stereo audio tracks.

Mix Select one of the three settings to use a mix of the two stereo audio tracks.

Audio Out

Dolby Digital Out Dolby Digital • Output a Dolby Digital signal when a Dolby Digital source is being played.

Dolby Digital 

PCM

Convert Dolby Digital sources to Linear PCM output. Use if your connected

equipment doesn’t have a Dolby Digital decoder.

DTS Out On • Output a DTS signal when a DTS source is being played.

Off Switch off the digital output when a DTS source is being played. Use when

your connected equipment doesn’t have a DTS decoder. In this case, use

the analog audio outputs.

96 kHz PCM Out

96 kHz  48 kHz • Convert 96 kHz digital audio sources to 48 kHz output. Use if your connected

equipment doesn’t support 96 kHz sampling rate.

96 kHz Output 96 kHz digital audio when a 96 kHz source is being played.

MPEG Out MPEG Output an MPEG audio signal when a source using MPEG audio is being

played.

MPEG  PCM • Convert sources with MPEG audio to Linear PCM output. Use if your con-

nected equipment doesn’t have an MPEG audio decoder.

Audio DRC On Switches on Audio DRC (Dynamic Range Control). Use when listening to

Dolby Digital material at low volume.

Off • Switches off Audio DRC.

Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby Digital. In this case adjust

the dynamic range from the receiver subwoofer—see Dynamic Range Control on page 29.

Setting Options Explanation

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 133

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info