Bedienungsanleitung Pioneer RCS-77H (Seite 131 von 156) (Englisch)

791722

131

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

The Initial Setup menu 14

131

English

Tuner Settings

Auto Channel Setting Auto Scan

Select your country and then wait for the recorder to auto tune into

channels in your area. After auto scan has ﬁnished, the channel map-

ping screen appears showing which channels have been assigned to

which program numbers. You can skip unwanted channels using the

Manual Channel Setting option below.

Press

HOME MENU

to exit the channel mapping screen.

Download from TV

If your TV supports this feature you can download all the channels that

your TV is tuned to via the SCART input. Select your country and then

wait for the download to complete. After the download is complete, the

channel mapping screen appears, as above.

See also the operating instructions that came with your TV for more

information.

Manual CH Setting Next Screen

Proceed to the next screen if you need to adjust any of the settings

made by auto tuning. Select your country, then proceed to the manual

channel setting screen:

• Change channel presets using the

CHANNEL +/–

buttons.

• To skip the displayed channel (because there is no station assigned

to that channel), change the

Skip

setting to

• Set the

CH SYSTEM

setting to match the channel system of your

country or region.

• Set the

CHANNEL

setting to the channel you want to assign to the

current channel preset.

• To manually ﬁne tune the channel, change the

AFT

setting to

Off

then adjust the

Level

setting.

• The

Name

ﬁeld allows you to input a name of up to ﬁve characters

for the current channel preset.

• If the currently selected channel is scrambled requiring a decoder

connected to the

AV2 (INPUT 1/DECODER)

, set the

Decoder

setting

Channel Swapping Next Screen

Proceed to the next screen to swap channel assignments of different

presets so that you can group together presets that naturally go

together. Select two presets to swap then press

ENTER

Video In/Out Settings

Input Colour System Next Screen

Proceed to the next screen to set the input colour system for each

channel preset. Use the

CHANNEL +/–

buttons to change the preset.

On the default

Auto

setting the recorder can generally correctly detect

whether the input signal is PAL, SECAM, 3.58 NTSC or PAL-60, but in

some cases you may have to set it manually if the picture is displayed

incorrectly.

See also About the input colour system on page 137 for more information on this setting.

Component Video Out Interlace •

Select if your monitor/TV is not compatible with progressive-scan

video.

Progressive

Select if your monitor/TV is progressive-scan compatible. Check the

operating instructions that came with your monitor/TV if you’re not

sure.

For Component Video Out to be effective, the AV1 Out setting (see page 132) must be set to something other than

RGB

Setting Options Explanation

DVR-530H_EU.book Page 131 Friday, May 13, 2005 3:11 PM

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-77H Seite 131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-77H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info