Bedienungsanleitung Pioneer S-DV180 (Seite 17 von 122) (Englisch)

574058

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

Getting started 04

English

FrançaisDeutsch

Nederlands

Italiano Español

Chapter 4

Getting started

Setting Speaker Layout

Select the speaker layout for the speaker

setting you arranged to your listening area

environment.

First time you switch on the system, the

following speaker layout setting appears. If you

switch off the system without finishing this

setting, the same appears again next time you

switch on the system.

1 Press

 STANDBY/ON

and confirm

WELCOME is shown on the display.

2 SELECT SPEAKER LAYOUT will run on

the display for about 10 seconds.

3Use / to select appropriate speaker

layout.

There are two speaker layout modes – 5 spot

speaker layout and 3 spot speaker layout.

See Setup Guide for more details about

speaker layout and mode description.

• 5 SPOT – Optimal for 5.1 channel home

theater sound by placing the two surround

speakers in the rear of the listening

position.

• 4 SPOT (HTZ181DVD only) – This is the

standard layout for listening to the

surround sound, which is similar to the 5

spot speaker layout. The two center

speakers are separated to the right and left

sides, and neatly arranged around the TV.

• 3 SPOT – This is the classic layout for the

Front Surround mode. The two surround

speakers are placed in front of the listening

position.

• 2 SPOT (HTZ181DVD only) – This layout

for the Front Surround mode is the same

as the 3 spot speaker layout. The two

center speakers are separated to the right

and left sides, and neatly arranged around

the TV.

4 Press ENTER to confirm.

Setting the channel levels

Set the relative channel levels from your main

listening position.

1Press

SHIFT+SETUP

2Use / to select SOUNDSET, then

press ENTER.

3Use / to select CH LEVEL, then

press ENTER.

4Use / to select TESTTONE, then

press ENTER.

The test tone is output in the following order

(from the speakers active in the current

listening mode):

• L – Front left speaker

• C – Center speaker

• R – Front right speaker

• SR – Surround right speaker

• SL – Surround left speaker

• SW – Subwoofer

Note

1 To change the setting, press SHIFT+SETUP, use / to select SYS SET, then use / to select LAYOUT to start setting

procedure.

2 • This is only available when DVD/CD is selected and playback is stopped. Also make sure headphones are unplugged.

• To adjust the overall balance while listening to any sound source you want, press SHIFT+SETUP, use / to select

SOUNDSET, then press ENTER. Use / to select CH LEVEL, then press ENTER. Use / to switch between channels, and

/ to adjust the channel levels. Press ENTER when you’re finished.

3 Since the subwoofer produces ultra-low frequencies its sound may seem quieter than it actually is.

HTZ180_181_280_282DVD_En.book 17 ページ２００９年３月１３日　金曜日　午後２時５０分

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer S-DV180 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info