Bedienungsanleitung Pioneer S-DV1T (Seite 12 von 85) (Englisch)

574060

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

Getting started02

Listening to the radio

The tuner can receive both FM and AM

broadcasts, and lets you memorize your

favorite stations so you don’t have to manually

tune in every time you want to listen.

1 Press

TUNER

to switch to the tuner, then

press repeatedly to select the AM or FM band.

The display shows the band and frequency.

2 Tune to a frequency.

There are three tuning modes—manual, auto,

and high-speed:

•

Manual tuning

: Press

TUNE +/–

repeatedly to change the displayed

frequency.

•

Auto tuning

: Press and hold

TUNE +/–

until the frequency display starts to move,

then release. The tuner will stop on the next

station it finds. Repeat to keep searching.

•

High-speed tuning

: Press and hold

TUNE

+/–

until the frequency display starts to

move rapidly. Keep the button held down

until you reach the frequency you want. If

necessary, fine tune the frequency using

the manual tuning method.

Improving poor FM reception

If you’re listening to an FM station in stereo but

the reception is weak, you can improve the

sound quality by switching to mono.

1 Tune to an FM radio station then press

SETUP

2 Use

/

to choose FM MODE then press

ENTER

3 Use

/

to select

FM MONO

then press

ENTER

The mono indicator ( ) lights when the tuner

is in mono reception mode.

Select

FM AUTO

above to switch back to auto-

stereo mode (the stereo indicator ( ) lights

when receiving a stereo broadcast).

Memorizing stations

You can save up to 30 station presets so that

you always have easy access to your favorite

stations without having to tune in manually

each time.

1 Tune to an AM or FM radio station.

For the FM band, select mono or auto-stereo

reception as necessary. This setting is saved

along with the preset.

2 Press

SETUP

and use

/

to choose

‘ST.MEM.’ then press

ENTER

3 Use

/

to select the station preset you

want then press

ENTER

Listening to station presets

1 Make sure the

TUNER

function is selected.

2 Use the

ST +/–

buttons to select a station

preset.

• You can also use the number buttons to do

this.

Listening to other sources

You can connect auxiliary sources (TV, satellite

receiver, etc.) to this unit for playback through

the speaker system. See

Connecting auxiliary

audio components

on page 29 for more on this.

• To connect a USB device to the USB

terminal, see

USB playback

on page 22.

1 Make sure that the external source (TV,

satellite receiver, etc.) is switched on.

2 Press

LINE

to select the source.

3 If necessary, start playback of the source.

AUDIO

STANDBY

/ON DVD/CD

TUNER

(FM/AM)

LINE

USB

OPEN/

XV-DV151_252.book 12 ページ２００６年２月２４日　金曜日　午後２時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer S-DV1T Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info