Bedienungsanleitung Pioneer S-SLW500 (Seite 2 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

455333

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the

instructions, put them away in a safe place for future reference.

Before you start

S-HV600B/S-HV500-LR

• This speaker system has an impedance of 8 Ω, and should be

connected only to an amplifier designed with a load

impedance of 8 Ω (the amplifier’s speaker output connector

should clearly be labeled “8 Ω”).

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

•Do not supply power to the speaker system in excess of the

maximum permissible input.

•When using a graphic equalizer to emphasize loud sounds in

the high-frequency range, do not use excessive amplifier

volume.

•Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will be

increased, and you may damage the speaker).

Caution: installation

• Do not place the speaker on an unstable surface, as doing so

may cause the speaker to fall and cause damage or bodily

injury.

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

• If you intend to install the speakers on a wall, first confirm that

the wall is capable of supporting the weight of the speaker

systems (S-HV600B: 1.7 kg, S-HV500-LR: 0.4 kg). If you are

uncertain about the load-bearing capacity of the wall, consult

a building specialist. Installing the speakers on an insecure

wall is extremely dangerous, since the speakers could fall,

leading to grave personal injury.

• After mounting, confirm the safety of the installation. Make

periodic safety checks thereafter as well to confirm that the

speakers continue to be mounted securely.

Caution: in use

• Do not use the speaker to output distorted sound for long

periods of time. This can result in damages to the speaker and

poses a potential fire hazard.

• Do not place heavy or large objects on top of the speaker.

Doing so could provoke the speaker to fall, causing damages

or bodily injury.

• Do not connect these speakers to devices other than an AV

amplifier or other audio component, since malfunctions could

result.

• This product incorporates autoregression technology to

protect the speakers. If the speakers stop emitting noise when

receiving too large a signal, turn the volume down on the amp

and wait a few seconds. The protection feature disables itself

automatically.

S-SLW500

• This product is a passive subwoofer, and must be combined

with the VSX-S300 or other audio device provided with a built-

in subwoofer amplifier.

• This speaker system has an impedance of 4 Ω, and should be

connected only to an amplifier designed with a load

impedance of 4 Ω (the amplifier’s speaker output connector

should clearly be labeled “4 Ω”).

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

•Do not supply power to the speaker system in excess of the

maximum permissible input.

•When using a graphic equalizer to emphasize loud sounds in

the high-frequency range, do not use excessive amplifier

volume.

•Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will be

increased, and you may damage the speaker).

Caution: installation

• Do not place the speaker on an unstable surface, as doing so

may cause the speaker to fall and cause damage or bodily

injury.

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

• Do not attach these speakers to the wall or ceiling, as they may

cause injury in the event of a fall.

• Do not install your speakers overhead on the ceiling or wall.

Caution: in use

• Do not use the speaker to output distorted sound for long

periods of time. This can result in damages to the speaker and

poses a potential fire hazard.

• Do not place heavy or large objects on top of the speaker.

Doing so could provoke the speaker to fall, causing damages

or bodily injury.

• Do not sit or stand on the speaker, or let children play on the

speaker. Doing so could provoke the speaker to fall, causing

damages or bodily injury.

• The speaker system grill cannot be removed. Do not try to

forcibly remove it since doing so may damage the grille.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to

keep the cabinet clean. If necessary, clean with a cloth dipped in

a neutral cleanser diluted five or six times with water, and wrung

out well. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals

on or near this unit since these will corrode the surfaces.

Pioneer is not responsible for any accidents or damage that

result from improper installation, misuse or modification of

the product, or natural disasters.

S-HV600B_S-HV500-LR_En.fm 2 ページ２０１１年４月１２日　火曜日　午後２時３１分

Pioneer S-SLW500 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer S-SLW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info