Bedienungsanleitung Pioneer S-SLW500 (Seite 6 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

455333

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

• Mounting the speakers in an unstable location is extremely

dangerous and should not be attempted.

• Do not install the speakers on top of a television set or other

unstable location. The speakers may fall, causing damage or

personal injury.

S-HV500-LR

• Sounds played through speaker systems are easily affected in

subtle ways by the conditions in the listening space.

• Can be mounted vertically or horizontally.

• When using a thin-profile television, place the speakers to the

sides of the television, separated from the television by 5 cm

or more.

• When using a CRT television, separate the speakers from the

television by 10 cm. Since these speakers are designed for

low-magnetic-flux leakage, some color smearing may be

experienced depending on the installation conditions. In this

case, turn off the power to the television and wait for 15

minutes to 30 minutes. If color smearing continues, separate

the speaker systems farther from the television.

• If the room has a lot of reverberation, we recommend hanging

heavy fabric on the walls, and/or putting a carpet on the floor

to damp the sound. For best results, cover walls completely.

• Mounting the speakers in an unstable location is extremely

dangerous and should not be attempted.

• Do not install the speakers on top of a television set or other

unstable location. The speakers may fall, causing damage or

personal injury.

S-SLW500

• The subwoofer reproduces ultra-low sounds in monaural,

using the fact that the human ear has little directional

sensitivity to sounds in the low frequencies. As a result, the

subwoofer can be located in a variety of places, but if placed

too distant, the linkage between sounds of the subwoofer and

other speakers may seem unnatural. The intensity of the

sound from the subwoofer can be adjusted by changing the

distance from the wall.

• Front speakers installed to the right and left should be

separated by about 1.8 m to 2.7 m distance. They should be

installed at equal distances from the television, and at equal

heights from the floor.

• Optional speaker stands can be purchased to facilitate

optimal mounting of the surround speakers at or slightly

above the listener’s ear height.

• The surround effect will be diminished if the surround

speakers are mounted at extreme distances from the listener’s

position.

• The subwoofer is not magnetically shielded and so should not

be placed near a TV or monitor, as the interaction of magnetic

materials can cause distortion of the colors on your TV screen.

Devices easily affected by magnetism (magnetic media cards,

wrist-watches, video tapes, etc.) should not be placed near the

subwoofer.

• When installing the speaker system on a TV rack or AV rack,

the rack or other audio components may vibrate due to

vibrations generated by the speaker. Caution should be taken

to assure that the rack shelves or other components do not

shift positions due to the vibration.

• Do not place disc media (DVD, CD) players on top of the

subwoofer since sound skipping may occur due to vibration.

• When installing, allow at least 10 cm space between the rear

of the unit and any wall; when installing vertically, also allow

at least 10 cm space between the unit's left side and any wall.

If insufficient distance is taken, the unit may display

inadequate performance, or may malfunction.

• Since the speaker system is heavy, installation in unstable

locations is extremely dangerous and should not be

attempted. A falling speaker may cause damage or personal

injury.

Wall mounting the speakers

(S-HV600B/S-HV500-LR)

Before mounting

• Remember that the speaker system is heavy and that its

weight could cause the screws to work loose, or the wall

material to fail to support it, resulting in the speaker falling.

Make sure that the wall you intend to mount the speakers on

is strong enough to support them. Do not mount on plywood

or soft surface walls.

• Mounting screws are not supplied. Use screws suitable for the

wall material and support the weight of the speaker.

• If you are unsure of the qualities and strength of the wall,

consult a professional for advice.

• Pioneer is not responsible for any accidents or damage that

result from improper installation.

S-HV600B

1 Use a Phillips screwdriver to remove the two screws

holding the stands to the speaker.

2 Using the two screws removed in step 1, fasten the wall

mounting fixtures to the speaker.

3 Affix the supplied wire stays to the top of the unit as

shown and collect the cable there.

Press until a “click”

is heard.

S-HV600B_S-HV500-LR_En.fm 6 ページ２０１１年４月１２日　火曜日　午後２時３１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer S-SLW500 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer S-SLW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info