Bedienungsanleitung Pioneer SBX-B70 (Seite 22 von 65) (Englisch)

794029

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Connect network08

A: Connecting with a LAN cable (wired

LAN)

Simply connect the LAN cable. Network settings are

unnecessary.

• When wireless LAN is set once, the following procedures

1 through 3 must be executed.

1 Select “

Network Type Set

” from the

HOME

2Use

/

to select “

Wired

”.

3 Press

ENTER

A-1: Wired connection to a router with DHCP

server

1 Confirm that this unit is powered off.

2 Use a LAN cable to connect this unit and

your router.

3 Press

 STANDBY/ON

Wait for about 30 to 40 seconds.

4 When the power is fully turned on, the

NETWORK indicator will light white.

A-2: Setting this unit from the web browser of

a computer that supports a wired LAN

connection

• Only when connected to a network without a DHCP

server function, the following network settings are

necessary. Check the setting value with the provider or

network administrator in advance when executing the

settings. Also refer to the user’s manual for network

equipment.

•IP Address

The IP address to be entered must be defined within the

following ranges. If the IP address defined is beyond the

following ranges, you cannot play back audio files stored

on components on the network or listen to Internet radio

stations.

Class A: 10.0.0.1 to 10.255.255.254

Class B: 172.16.0.1 to 172.31.255.254

Class C: 192.168.0.1 to 192.168.255.254

•Subnet Mask

In case an xDSL modem or a terminal adapter is directly

connected to this unit, enter the subnet mask provided

by your ISP on paper. In most cases, enter 255.255.255.0.

•Default Gateway

In case a gateway (router) is connected to this unit, enter

the corresponding IP address.

•Primary DNS Server/Secondary DNS Server

In case there is only one DNS server address provided by

your ISP on paper, enter it in the “Primary DNS Server”

field. In case there are more than two DNS server

addresses, enter “Secondary DNS Server” in the other

DNS server address field.

•Proxy Hostname/Proxy Port

This setting is required when you connect this unit to the

Internet via a proxy server. Enter the IP address of your

proxy server in the “Proxy Hostname” field. Also, enter

the port number of your proxy server in the “Proxy Port”

field.

1 Turn off power to the unit.

If a LAN cable is connected to the unit, disconnect the LAN

cable from the unit.

2 Use a LAN cable to connect the unit to the

computer.

3Press

 STANDBY/ON

Wait for about 30 to 40 seconds.

4 Wait for the NETWORK indicator to change

from flashing to steadily lighted red.

This may require up to 90 seconds or so.

5 When the NETWORK indicator lights red,

start your computer’s Web browser, and access

the URL noted below to make settings for this

unit.

The Web Control menu will appear.

http://169.254.1.1http://169.254.1.1

SBX-B70_En.book 22 ページ２０１５年４月１３日　月曜日　午前１０時２５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SBX-B70 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SBX-B70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info