Bedienungsanleitung Pioneer SC-1223 (Seite 31 von 119) (Englisch)

536834

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Connecting your equipment

MULTI-ZONE setup

This receiver can power up to two independent systems in separate rooms after you have made the proper MULTI-

ZONE connections.

Different sources can be playing in two zones at the same time or, depending on your needs, the same source

can also be used. The main and sub zone have independent power (the main zone power can be off while sub

zone is on) and the sub zone can be controlled by the remote or front panel controls.

Making MULTI-ZONE connections

It is possible to make these connections if you have a separate TV and speakers for your primary sub zone

(ZONE 2). You will also need a separate amplifier if you are not using the speaker terminals for your primary sub

zone. (For details, see MULTI-ZONE setup using speaker terminals (ZONE 2) on page 31.) Also, if the separate

receiver in the sub zone has an HDMI input terminal, this unit’s HDMI input can be played as HDZONE.

Here are two primary sub zone setups possible with this system. Choose whichever works best for you.

Important

! The settings must be changed at ZONE Setup in order to use the multi-zone function (page 91).

! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 91).

MULTI-ZONE listening options

The following table shows the signals that can be output to ZONE 2 and HDZONE:

Sub Zone Input functions available

ZONE 2

<a>

DVD, SAT/CBL, DVR/BDR, INTERNET RADIO, MEDIA SERVER, FAVORITES, iPod/USB,

TV, CD, TUNER, ADAPTER PORT

(Outputs analog audio and composite video.)

HDZONE

(HDMI)

<b>

BD, DVD, SAT/CBL, DVR/BDR, HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5/MHL, HDMI

6, HDMI 7

(Outputs HDMI audio and video signals)

a ! It is not possible to down-convert the audio and video input signals from the HDMI input terminals, digital input terminals

(OPTICAL and COAXIAL) and the COMPONENT VIDEO input terminals and output them to ZONE 2.

! When any of the INTERNET RADIO, MEDIA SERVER, FAVORITES, iPod/USB or ADAPTER PORT inputs is selected in the

main zone, it is only possible to select the same input as in the main zone for the sub zone. (Inputs other than the ones listed

here can be selected.)

The same limitations apply when one of the above inputs is selected for the sub zone.

b ! The inputs that can be switched differ according to how terminals HDMI IN 1 to IN 7 are assigned. Upon shipment from the

factory, the input terminals are assigned to DVD, SAT/CBL, DVR/BDR, HDMI 4, HDMI 5/MHL, HDMI 6 and HDMI 7, in order

starting from terminal HDMI IN 1.

! The video/audio signals of the RCA analog input terminals, the digital input terminals (OPTICAL and COAXIAL) and the COM-

PONENT VIDEO input terminals cannot be up-converted and output to the HDZONE.

! When any of the HDMI 4, HDMI 6 or HDMI 7 inputs is selected in the main zone, it is only possible to select the same input as

in the main zone for the HDZONE. (Inputs other than the ones listed here can be selected.)

The same limitations apply when one of the above inputs is selected for the HDZONE.

Basic MULTI-ZONE setup (ZONE 2)

1 Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.

You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.

2 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.

ZONE 2

OUT

ZONE 2

OUT

AUDIO IN

VIDEO IN

Sub zone (ZONE 2) Main zone

MULTI-ZONE setup using speaker terminals (ZONE 2)

You must select ZONE 2 in Speaker system setting (page 86) to use this setup.

1 Connect a pair of speakers to the surround back speaker terminals.

You should have a pair of speakers attached to the surround back speaker terminals as shown below.

2 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.

Sub zone (ZONE 2) Main zone

VIDEO IN

(Single)

ZONE 2

OUT

SURROUND BACK

(Single)

ZONE 2

OUT

SURROUND BACK

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-1223 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-1223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info