Bedienungsanleitung Pioneer SC-1223 (Seite 43 von 119) (Englisch)

536834

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Basic playback

Playing an iPod

This receiver has the iPod/iPhone/iPad terminal that will allow you to control playback of audio content from

your iPod using the controls of this receiver.

Here we describe the procedure for playback on an iPod. For playback on a USB device, see Playing a USB device

on page 44.

Important

! USB works with iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPad (3rd and 4th generation),

iPad 2, iPad, iPad mini, iPod touch (1st through 5th generation) and iPod nano (3rd through 7th generation).

Audio only for iPhone 5, iPad 4th generation, iPad mini, iPod touch 5th generation and iPod nano (6th and 7th

generation).

However, some of the functions may be restricted for some models.

! This receiver has been developed and tested for the software version of iPod/iPhone/iPad indicated on the

website of Pioneer.

http://pioneer.jp/homeav/support/ios/eu/

! Installing software versions other than indicated on the website of Pioneer to your iPod/iPhone/iPad may result

in incompatibility with this receiver.

! iPod, iPhone and iPad are licensed for reproduction of non-copyrighted materials or materials the user is

legally permitted to reproduce.

! Features such as the equalizer cannot be controlled using this receiver, and we recommend switching the

equalizer off before connecting.

! Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any

inconvenience or loss of recorded material resulting from the iPod failure.

! When listening to a track on the iPod in the main zone, it is possible to control the sub zone, but not to listen to

a different track in the sub zone from the one playing in the main zone.

1 Press u STANDBY/ON to switch on the receiver and your TV.

See Connecting an iPod on page 33.

About one minute is required between turning the power on and completion of startup.

! It is also possible to operate the iPod on the iPod itself, without using the TV screen. For details, see

Switching the iPod controls on page 43.

2 Press iPod USB on the remote control to switch the receiver to the iPod/USB.

When the display shows the names of folders and files, you’re ready to play music from the iPod.

! The controls of your iPod will be inoperable when connected to this receiver.

Playing back audio files stored on an iPod

To navigate songs on your iPod, you can take advantage of the GUI screen of your TV connected to this receiver.

You can also control all operations for music in the front panel display of this receiver.

! Note that characters that cannot be displayed on this receiver are displayed as #.

! This feature is not available for photos on your iPod. To display photos, switch iPod operation to the iPod (see

Switching the iPod controls on page 43).

Finding what you want to play

When your iPod is connected to this receiver, you can browse songs stored on your iPod by playlist, artist name,

album name, song name, genre or composer, similar to using your iPod directly.

1 Use i/j to select a category, then press ENTER to browse that category.

! When o or p is pressed at the list screen, the page switches.

! To return to the previous level any time, press RETURN.

2 Use i/j to browse the selected category (e.g., albums).

! Use k/l to move to previous/next levels.

3 Continue browsing until you arrive at what you want to play, then press d to start

playback.

Note

You can play all of the songs in a particular category by selecting the All item at the top of each category list. For

example, you can play all the songs by a particular artist.

Basic playback controls

This receiver’s remote control buttons can be used for basic playback of files stored on an iPod.

! Press iPod USB to switch the remote control to the iPod/USB operation mode.

TOP MENU

ENTER

RETURN

DISP

Switching the iPod controls

You can switch over the iPod controls between the iPod and the receiver.

1 Press iPod CTRL to switch the iPod controls.

This enables operation and display on your iPod, and this receiver’s remote control and GUI screen become

inactive.

2 Press iPod CTRL again to switch back to the receiver controls.

Note

Change the receiver’s input to the iPod in one action by pressing the iPod iPhone iPad DIRECT CONTROL button

on the front panel to enable iPod operations on the iPod.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-1223 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-1223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info