Bedienungsanleitung Pioneer SC-1223 (Seite 73 von 119) (Englisch)

536834

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Controlling the rest of your system

About the Remote Setup menu

The Remote Setup mode is set by pressing the number button while pressing RCU SETUP. The different items

on the Remote Setup menu are described below. For their setting procedures, refer to the explanations for the

respective items.

Setting What it does

Preset recall

Preset codes can be set for the various input functions. The remote control codes of a number of other

devices (including products of other brands) are preset in the remote control to allow these devices to be

operated. See Selecting preset codes directly on page 73.

Code learning

If the desired operations cannot be performed even though you have set the preset codes, the remote control

signals of other devices can be learned directly. See Programming signals from other remote controls on

page 74.

Direct function

This is a setting for changing only the remote control unit’s operation screen, without changing the receiver’s

input, when the remote control unit’s input function buttons are pressed. This is convenient for using the

remote control unit for devices not connected to the receiver. See Direct function on page 75.

Erase learning

This function is used to erase remote control codes that have been learned. Codes learned for the different

input functions can be erased individually. See Erasing one of the remote control button settings on page 74.

Reset function

This is a function for resetting preset codes that have been set. Key resetting can be done for individual input

functions. See Erasing all learnt settings that are in one input function on page 75.

All reset

This is a function for resetting all remote control unit settings you have made to the defaults set upon ship-

ment from the factory. See Resetting the remote control settings on page 75.

Change RC

mode

If you have multiple Pioneer receivers, amplifiers, etc., this setting can be used to prevent other units from

operating simultaneously when the remote control unit is operated. See Operating multiple receivers on page

73.

Notes

! You can cancel or exit any of the steps by pressing RCU SETUP.

! After one minute of inactivity, the remote automatically exits the operation.

Operating multiple receivers

Up to four receivers can be operated discretely using this receiver’s remote control when using multiple receiv-

ers, provided they are of the same model as this receiver. The receiver to be operated is switched by inputting the

preset code to set the remote control setting.

! Set the remote modes on the receivers before using this function (see Remote Control Mode Setup on page

90).

1 Press and hold RCU SETUP, then press ‘4’ for three seconds.

Release the button after the LED flashes once. The LED continues to flash.

! To cancel the preset setup mode press RCU SETUP.

2 Press the number button for the receiver (“Receiver 1” to “Receiver 4”) you wish to

operate.

For example, to operate “Receiver 2”, press ‘2’.

If the LED lights for one second and continues to flash, the setting has been successfully completed.

When the preset code is input, the LED flashes three times to indicate that the setting has failed.

Setting the remote to control other components

Most components can be assigned to one of the input function buttons (such as DVD or CD) using the compo-

nent’s manufacturer preset code stored in the remote.

However, there are cases where only certain functions may be controllable after assigning the proper preset

code, or the codes for the manufacturer in the remote control will not work for the model that you are using.

If you can’t find a preset code that matches the component you want to control, you can still teach the remote

individual commands from another remote control (see Programming signals from other remote controls on

page 74).

! With the TV CONTROL buttons, the TV can be operated regardless of the input set for the remote control’s

operation mode. When using one TV set, we recommend assigning the same TV’s preset codes to the

TV CONTROL INPUT button and the TV button. When using two TV sets, for better convenience assign the TV

connected to the MONITOR OUT terminals to the TV CONTROL INPUT button, the other TV to the TV button.

! Devices may be assigned to the following input function buttons.

TV CONTROL

INPUT

SELECT

iPod

USB

STATUS

TUNERMHL

ADPT

RCU SETUP

SOURCE

STANDBY/ON

NET

RECEIVER

MUTE

VOLUME

VOL

ALL ZONE STBY

DISCRETE ON

CBL

SAT

CDTV

BDR

BD DVDDVR HDMI

RECEIVER

D.ACCESS

CH LEVEL

DIMMER SLEEP

SIGNAL SEL

SPEAKERS

PRESET TUNE

ZONE 2 ZONE 3

HD ZONE

CLASS

ENTER

CLR

546

132

+Favorite

Z2 Z3 HDZ

HDMI OUT

MCACC

AUTO/ALC/

DIRECT

AUTO

S.RTRV

STANDARDADV SURR

AUDIO

DISP

OPTION

Selecting preset codes directly

1 Press and hold RCU SETUP, then press ‘1’ for three seconds.

Release the button after the LED flashes once. The LED continues to flash.

! To cancel the preset setup mode press RCU SETUP.

2 Press the input function button for the component you want to control.

To assign the preset codes of the TV to be operated with the TV CONTROL function, press the TV CONTROL

INPUT button.

The LED blinks once and flashes continuously.

3 Use the number buttons to enter the 4-digit preset code.

See Preset code list on page 114.

If the LED lights for one second and continues to flash, the setting has been successfully completed.

When the preset code is fully input, the LED flashes three times to indicate that the setting has failed. If this hap-

pens, enter the 4-digit preset code again.

Pioneer SC-1223 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-1223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info