Bedienungsanleitung Pioneer SC-1223 (Seite 91 von 119) (Englisch)

536834

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

The System Setup and Other Setup menus

Software Update messages

Status messages Descriptions

FILE ERROR

Try disconnecting then reconnecting the USB device or storing the update file again. If the error still

occurs, try using a different USB memory device.

No update file was found on the USB memory device. Store the file in the USB memory device’s root

directory.

UPDATE ERROR 1 to

UPDATE ERROR 7

Turn the receiver’s power off, then turn it back on and try updating the software again.

Update via USB

If this message flashes, updating has failed. Update via a USB memory device. Put the update file on a

USB memory device and connect the device to the USB port. When the file is found, software updating

starts automatically.

UE11

Updating has failed. Use the same procedure to update the software again.

UE22

UE33

ZONE Setup

Switches the sub-zone setting.

1 Select ‘ZONE Setup’ from the Other Setup menu.

2 Select ‘MAIN/HDZONE’, then press ENTER.

3 Set the usage of the HDMI OUT 2 terminal.

! MAIN: Select this to output the same input source as in the main zone.

After setting this to MAIN, exit the home menu, then press HDMI OUT and select the terminal for HDMI

output (page 70).

! HDZONE (default): Use the HDMI output’s multizone function (HDZONE) to output an input source different

from the one in the main zone (page 69).

4 When you’re finished, press RETURN.

You will return to the Other Setup menu.

ZONE 2 setup

When making multi-zone connections using the AUDIO ZONE 2 OUT terminals and performing playback in Zone

2, you can set whether to adjust the Zone 2 volume on the receiver or to fix it to a specific volume (–40 dB Fixed

or 0 dB Fixed). This is set to Variable upon shipment from the factory, allowing the volume to be adjusted on the

receiver. If you would like to adjust the volume from the connected amplifier, make the setting below.

! This setting is not possible if multi-zone settings have been made using the speaker terminals and

Speaker System is set to anything other than ZONE 2. In this case, adjust the volume for the sub zones on the

receiver.

CAUTION

! Note that when Volume Level is set to 0 dB Fixed, the audio output from the AUDIO ZONE 2 OUT terminals

is set to the maximum. Also, depending on the volume setting on the connected amplifier, large volumes may

be produced even when Volume Level is set to –40 dB Fixed.

1 Select ‘ZONE Setup’ from the Other Setup menu.

2 Select ‘ZONE 2’, then press ENTER.

3 Select the Volume Level setting you want.

! Variable (default) – The Zone 2 volume is adjusted from the receiver.

! –40 dB Fixed/0 dB Fixed – The Zone 2 volume level output from the receiver is fixed to the value set here.

4 When you’re finished, press RETURN.

You will return to the Other Setup menu.

On Screen Display Setup

When the receiver is operated, its status (the input name, listening mode, etc.) is displayed superimposed over

the video output on the display. This status display can be turned off by switching this setting to OFF.

! Default setting: ON

1 Select ‘On Screen Display Setup’ from the Other Setup menu.

2 Select the On Screen Display setting you want.

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Notes

! The on-screen display is not displayed for video outputs from the HDMI OUT 2 and VIDEO MONITOR OUT

terminals.

! Depending on the type of video input signal (4K, 3D, etc.), the on-screen display may not be displayed.

! The size of the characters displayed differs according to the output resolution.

Play ZONE Setup

Select the zone for playing the audio contents of devices in the home network when using in the DMR mode.

! For playable DLNA-compatible network devices, see page 55.

1 Select ‘Play ZONE Setup’ from the Other Setup menu.

2 Select the zone in which you want to play the audio contents.

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Note

If another zone is on, it may not be possible to play the audio contents. In this case, turn the other zone off, then

play the audio contents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-1223 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-1223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info