Bedienungsanleitung Pioneer SC-1224 (Seite 88 von 126) (Englisch)

611801

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

The Advanced MCACC menu

Speaker Distance

Use this to display the distance from the different channels to the listening position. See Speaker Distance on

page 91 for more on this.

1 Select ‘Speaker Distance’ from the MCACC Data Check menu.

2 When ‘MCACC’ is highlighted, use k/l to select the MCACC preset you want to check.

The distance from the various channels set at the selected MCACC preset is displayed. ‘---’ is displayed for chan-

nels that are not connected.

Standing Wave

Use this to display the standing wave related adjustment values for the various MCACC memories. See Standing

Wave on page 86 for more on this.

1 Select ‘Standing Wave’ from the MCACC Data Check menu.

2 When ‘Filter Channel’ is highlighted, use i/j to select the channel for which you want to

check standing wave control.

The standing wave related calibration value for the selected channel stored at the selected MCACC preset and its

graph are displayed.

3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to

check.

Acoustic Cal EQ

Use this to display the calibration values for the frequency response of the various channels set in the different

MCACC presets. See Acoustic Calibration EQ Adjust on page 86 for more on this.

1 Select ‘Acoustic Cal EQ’ from the MCACC Data Check menu.

2 When ‘Ch’ is highlighted, use i/j to select the channel.

The calibration value for the frequency response of the selected channel stored at the selected MCACC preset

and its graph are displayed.

3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to

check.

Data Management

This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listen-

ing positions (or frequency adjustments for the same listening position). This is useful for alternate settings to

match the kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa,

or playing a video game close to the TV).

From this menu you can copy from one preset to another, name presets for easier identification and clear any

ones you don’t need.

! This can be done in Automatically conducting optimum sound tuning (Full Auto MCACC) on page 39 or

Automatic MCACC (Expert) on page 83 , either of which you should have already completed.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘Data Management’ from the HOME MENU.

3 Select the setting you want to adjust.

! Memory Rename – Name your MCACC presets for easy identification (see Renaming MCACC presets on

page 88 ).

! MCACC Memory Copy – Copy settings from one MCACC preset to another (see Copying MCACC preset data

on page 88 ).

! MCACC Memory Clear – Clear any MCACC presets that you don’t want (see Clearing MCACC presets on

page 88 ).

Renaming MCACC presets

If you have several different MCACC presets that you’re using, you may want to rename them for easier

identification.

1 Select ‘Memory Rename’ from the Data Management setup menu.

2 Select the MCACC preset you want to rename, then select an appropriate preset name.

Use i/j to select the preset, then k/l to select a preset name.

3 Repeat for as many MCACC presets as necessary, then press RETURN when you’re finished.

You will return to the Data Management setup menu.

Copying MCACC preset data

If you want to manually adjust the Acoustic Calibration EQ (see Manual MCACC setup on page 85 ), we recom-

mend copying your current settings to an unused MCACC preset. Instead of just a flat EQ curve, this will give you

a reference point from which to start.

! The settings made in Automatically conducting optimum sound tuning (Full Auto MCACC) on page 39 or

Automatic MCACC (Expert) on page 83 .

1 Select ‘MCACC Memory Copy’ from the Data Management setup menu.

2 Select the setting you want to copy.

! All Data – Copies all the settings of the selected MCACC preset memory.

! Level & Distance – Copies only the channel level and speaker distance settings of the selected MCACC pre-

set memory.

3 Select the MCACC preset you’ll be copying the settings ‘From’, then specify where you

want to copy them ‘To’.

Make sure you don’t overwrite an MCACC preset you’re currently using (this can’t be undone).

4 Select ‘OK’ to confirm and copy the settings.

When MCACC Memory Copy? is displayed, select YES. If NO is selected, the memory is not copied.

Completed! shows in the GUI screen to confirm the MCACC preset has been copied, then you automatically

return to the Data Management setup menu.

Clearing MCACC presets

If you are no longer using one of the MCACC presets stored in memory, you can choose to clear the calibration

settings of that preset.

1 Select ‘MCACC Memory Clear’ from the Data Management setup menu.

2 Select the MCACC preset you want to clear.

Make sure you don’t clear an MCACC preset you’re currently using (this can’t be undone).

3 Select ‘OK’ to confirm and clear the preset.

When MCACC Memory Clear? is displayed, select YES. If NO is selected, the memory is not cleared.

Completed! shows in the GUI screen to confirm the MCACC preset has been cleared, then you automatically

return to the Data Management setup menu.

Pioneer SC-1224 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-1224

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info