Bedienungsanleitung Pioneer SC-2024 (Seite 73 von 126) (Englisch)

611800

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Using other functions

Using the MULTI-ZONE controls

The following steps use the front panel controls to adjust the sub zone volume and select sources. See ZONE 2

remote controls and HDZONE remote controls on page 73 .

Important

! ZONE 3 is a function for SC-2024 only. It cannot be selected or set with SC-1224.

— The settings must be changed at ZONE Setup in order to use the HDZONE function (page 95 ).

1 Press the button on the front panel for the zone you want to operate (ZONE 2 ON/OFF,

ZONE 3 ON/OFF or HDZONE ON/OFF).

The zone switches between on and off each time the button is pressed.

The MULTI-ZONE indicator lights when the MULTI-ZONE control has been switched ON.

2 Press MULTI-ZONE CONTROL on the front panel to select the sub zone(s) you want.

! When the receiver is on, make sure that any operations for the sub zone are done while ZONE and your

selected sub zone(s) show in the display. If this is not showing, the front panel controls affect the main zone

only.

If the receiver is in standby, the display is dimmed, and ZONE and your selected sub zone(s) continue to show

in the display.

3 Use the INPUT SELECTOR dial to select the source for the zone you have selected.

For example, ZONE 2 SAT/CBL sends the source connected to the SAT/CBL inputs to the primary (ZONE 2) sub

room.

! If you select TUNER, you can use the tuner controls to select a preset station (see Saving station presets on

page 49 if you’re unsure how to do this). The tuner cannot be tuned to more than one station at a time.

Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not

to change stations when recording a radio broadcast.

4 Use the MASTER VOLUME dial to adjust the volume for the sub zone.

When Speaker System is set to anything other than ZONE 2, the volume output from the receiver’s AUDIO

ZONE 2 OUT terminals can be fixed to –40 dB or 0 dB and the volume can be adjusted from the connected ampli-

fier. If you want to adjust the volume from the connected amplifier, see ZONE Setup on page 95 .

5 When you’re finished, press MULTI-ZONE CONTROL again to return to the main zone

controls.

You can also press ZONE 2 ON/OFF, ZONE 3 ON/OFF or HDZONE ON/OFF on the front panel to switch off all

output to the sub zone.

! You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control

first.

! If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main

rooms so that this receiver is in standby.

Note

When the network function or iPod/USB input is selected using HDZONE, the video converter function is dis-

abled. For that reason, video connected with the video cable or component cable is not output from the HDMI

terminal. Also, upscaling of the HDMI input video cannot be performed. To enable the video converter function,

turn off HDZONE or set HDZONE to some other input.

ZONE 2 remote controls

Before operation, hold down Z2 on the remote control (for 1.5 seconds) until the remote control LED flashes one

time.

The following table shows the possible ZONE 2 remote controls:

Button(s) What it does

Switches on/off power in the sub zone.

ALL

Use to select the input function in the sub zone.

Input function buttons

Use to select the input function directly (this may not work for some functions) in the sub

zone.

VOLUME +/–

<a>

Use to set the listening volume in the sub zone.

MUTE

<a>

Mutes the sound or restores the sound if it has been muted (adjusting the volume also

restores the sound).

a ! The volume cannot be adjusted on the receiver if Volume Level at ZONE 2 Setup under ZONE Setup is set to –40 dB Fixed

or 0 dB Fixed.

ZONE 3 remote controls

Press the remote control’s Z3 to operate the corresponding zone.

The following table shows the possible ZONE 3 remote controls:

Button(s) What it does

Switches on/off power in the sub zone.

ALL

Use to select the input function in the sub zone.

Input function buttons

Use to select the input function directly (this may not work for some functions) in the sub

zone.

VOLUME +/–

<a>

Use to set the listening volume in the sub zone.

MUTE

<a>

Mutes the sound or restores the sound if it has been muted (adjusting the volume also

restores the sound).

a ! The volume cannot be adjusted on the receiver if Volume Level at ZONE 3 Setup under ZONE Setup is set to –40 dB Fixed

or 0 dB Fixed.

HDZONE remote controls

Before operation, hold down HDZ on the remote control (for 1.5 seconds) until the remote control LED flashes

one time.

The following table shows the possible HDZONE remote controls:

Button(s) What it does

Switches on/off power in the HDZONE.

ALL

Use to select the input function in the HDZONE.

Input function buttons

Use to select the input function directly (this may not work for some functions) in the

HDZONE.

VOLUME +/–

<a>

Use to set the listening volume in the HDZONE.

MUTE

<a>

Mutes the sound or restores the sound if it has been muted (adjusting the volume also

restores the sound).

a You can operate this only when Speaker System is set to HDZONE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-2024 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info