Bedienungsanleitung Pioneer SC-2024 (Seite 108 von 126) (Englisch)

611800

108

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

108

FAQ

Symptom Cause Remedy

The sound of the Spotify

audio stream is not pro-

duced.

— Check whether this unit is selected on the Spotify applica-

tion.

Check that contents are playing on the Spotify application.

If the above does not solve the problem, turn this unit’s

power off then back on.

With an AV receiver that has the

‘System Setup’ d ‘Other Setup’ d

‘Play ZONE Setup’ option, the sound

may be playing in another zone.

If this is the case, set which zone the sound is to be played

in at the play zone settings.

This unit’s volume does not

increase when the volume

slider in the Spotify applica-

tion is raised.

A volume upper limit is provided so

that the volume will not inadvertently

go up too much.

To further increase the volume, use the remote control.

When the iControlAV5 or built-in AVNavigator application

is being used, you can use the application to increase the

volume.

Playback continues on

this unit when the Spotify

application is quit.

The Spotify audio stream continues

from this unit, even when the Spotify

application is quit.

To operate again, relaunch the Spotify application.

The Network functions

cannot be operated with

the buttons on the remote

control.

The remote control is not currently

set to the Network function mode.

Press NET to set the remote control to the Network func-

tion mode (page 59 ).

When the DMR mode or

AirPlay is used from a

computer, smartphone,

etc., the sound is played in

ZONE 2.

Play ZONE Setup is set to ZONE 2.

Change Play ZONE Setup to MAIN (page 96 ).

Network connections

cannot be made via the

wireless LAN converter

(AS-WL300).

—

For details, see Wireless LAN on page 108 .

Wireless LAN

Network cannot be accessed via wireless LAN.

Wireless LAN converter’s power is not on.

! Check that the USB cable connecting the wireless LAN converter to the receiver’s DC OUTPUT for

WIRELESS LAN terminal is properly connected.

WLAN POW ERR is displayed on the receiver’s display window.

! There is a problem with the wireless LAN converter’s power supply. Turn the receiver’s power off, then

disconnect the USB cable, reconnect the USB cable and turn the receiver’s power back on.

! If WLAN POW ERR is still displayed after repeating the above procedure several times, there is a problem

with the receiver or the USB cable. Unplug the receiver from the wall and call a Pioneer authorized inde-

pendent service company.

The LAN cable is not firmly connected.

! Firmly connect the LAN cable (page 35 ).

Wireless LAN converter and base unit (wireless LAN router, etc.) are too far apart or there is an obstacle

between them.

! Improve the wireless LAN environment by moving the wireless LAN converter and base unit closer

together, etc.

There is a microwave oven or other device generating electromagnetic waves near the wireless LAN

environment.

! Please refer to the manuals of the wireless LAN converter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-2024 Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info