Bedienungsanleitung Pioneer SC-LX56 (Seite 9 von 124) (Englisch)

491879

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Before you start

Operating range of remote control unit

The remote control may not work properly if:

! There are obstacles between the remote control and the receiver’s remote sensor.

! Direct sunlight or fluorescent light is shining onto the remote sensor.

! The receiver is located near a device that is emitting infrared rays.

! The receiver is operated simultaneously with another infrared remote control unit.

30°

7 m

Canceling the Auto Power Down

If no operation is performed for a certain amount of time with no audio or video signal being input, the receiver’s

power turns off automatically. The automatic power-off timer is set to 30 minutes under factory settings, and the

timing can be changed or the power-off function switched off altogether. For details, see Auto Power Down on

page 94.

About using AVNavigator (included CD-ROM)

The included AVNavigator CD-ROM contains Wiring Navi allowing you to easily make the receiver’s connections

and initial settings in dialog fashion. High precision initial settings can be completed easily simply by following

the instructions on the screen to make the connections and settings.

There are also other features enabling easy use of various functions, including an Interactive Manual that oper-

ates in association with the receiver, updating of various types of software, and MCACC Application that lets you

check the MCACC measurement results on 3D graphs.

Installing AVNavigator

1 Load the included CD-ROM into your computer’s CD drive.

The CD-ROM’s top menu screen appears.

2 Click ‘Install AVNavigator’ from the CD-ROM top menu.

3 Follow the instructions on the screen to install.

When “Finish” is selected, installation is completed.

4 Remove the included CD-ROM from the computer’s CD drive.

Handling the CD-ROM

Operating Environment

! AVNavigator can be used with Microsoft

Windows

XP/Vista/7.

! A browser is at times used for AVNavigator functions. The supported browser is Microsoft Internet Explorer 8

or 9.

! Adobe

Flash

Player 10 must be installed to use some of the functions in AVNavigator.

For details, see http://www.adobe.com/downloads/.

Precautions For Use

! This CD-ROM is for use with a personal computer. It cannot be used with a DVD player or music CD player.

Attempting to play this CD-ROM with a DVD player or music CD player can damage speakers or cause

impaired hearing due to the large volume.

License

! Please agree to the “Terms of Use” indicated below before using this CD-ROM. Do not use if you are unwilling

to consent to the terms of its use.

! Copyright to data provided on this CD-ROM belongs to PIONEER CORPORATION. Unauthorized transfer,

duplication, broadcast, public transmission, translation, sales, lending or other such matters that go beyond

the scope of “personal use” or “citation” as defined by Copyright Law may be subject to punitive actions.

Permission to use this CD-ROM is granted under license by PIONEER CORPORATION.

General Disclaimer

! PIONEER CORPORATION does not guarantee the operation of this CD-ROM with respect to personal com-

puters using any of the applicable OS. In addition, PIONEER CORPORATION is not liable for any damages

incurred as a result of use of this CD-ROM and is not responsible for any compensation. The names of private

corporations, products and other entities described herein are the registered trademarks or trademarks of their

respective firms.

Using AVNavigator

1 Click [AVNavigator 2012.III] on the desktop to launch AVNavigator.

AVNavigator is launched and Wiring Navi starts up. The language selection screen appears. Follow the instruc-

tions on the screen to make the connections and automatic settings.

Wiring Navi only starts up automatically the first time AVNavigator is launched.

2 Select and use the desired function.

AVNavigator includes the following functions:

! Wiring Navi – Guides you through connections and initial settings in dialog fashion. High precision initial

settings can be made easily.

! Operation Guide – Describes the receiver’s playback operations and how to use several functions through

videos and illustrations.

! Interactive Manual – Automatically displays the pages explaining the functions that have been operated on

the receiver. It is also possible to operate the receiver from the Interactive Manual.

! Glossary – Displays glossary pages.

! MCACC Appli – Displays Advanced MCACC measurement results vividly on the computer.

There are special operating instructions for MCACC Application. These instructions are included in the

AVNavigator Interactive Manual’s menus. Refer to them when using MCACC Application.

! Software Update – Allows various types of software to be updated.

! Settings – Used to make various AVNavigator settings.

! Detection – Used to detect the receiver.

Deleting the AVNavigator

You can use the following method to uninstall (delete) the AVNavigator from your PC.

% Delete from the Control Panel of the PC.

From the Start menu, click “Program” d “PIONEER CORPORATION” d “AVNavigator 2012.III” d “Uninstall

AVNavigator 2012.III”.

Pioneer SC-LX56 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX56

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info