Bedienungsanleitung Pioneer SC-LX56 (Seite 36 von 124) (Englisch)

491879

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Connecting your equipment

Connecting optional Bluetooth ADAPTER

When the Bluetooth

ADAPTER (AS-BT100 or AS-BT200) is connected to this receiver, a product equipped with

Bluetooth wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music

wirelessly.

! The Bluetooth wireless technology enabled device must support A2DP profiles.

! Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology

enabled devices.

! The Air Jam function cannot be used with the AS-BT100.

(

OUTPUT 5 V

0.1 A MAX

)

ADAPTER PORT

(

OUTPUT 5 V

0.1 A MAX

)

ADAPTER PORT

Bluetooth® ADAPTER

Important

! Do not move the receiver with the Bluetooth ADAPTER connected. Doing so could cause damage or faulty

contact.

% Switch the receiver into standby and connect Bluetooth ADAPTER to the ADAPTER PORT.

! For instructions on playing the Bluetooth wireless technology device, see Pairing the Bluetooth ADAPTER and

Bluetooth wireless technology device on page 50.

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod

using the controls of this receiver.

USB

iPod iPhone iPad

AUTO SURR/ALC/

STREAM DIRECT HOME THX

STANDARD

SURROUND

ADVANCED

SURROUND

iPod iPhone iPad

DIRECT CONTROL

5V 2.1

HDMI 5 INPUT/

MHL ( )

5V 1

iPod/iPhone/iPad

iPod cable

(supplied)

Tip

! An iPod/iPhone/iPad can be connected to the receiver. For details on supported models and versions of the

respective products, see Playing an iPod on page 46.

% Switch the receiver into standby then use the supplied iPod cable to connect your iPod to

the iPod iPhone iPad USB terminal on the front panel of this receiver.

! It is also possible to connect using the cable included with the iPod, but in this case it is not possible to view

pictures via the receiver.

! For the cable connection, also refer to the operating instructions for your iPod.

! iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the

unit’s power is turned on.)

! For instructions on playing the iPod, see Playing an iPod on page 46.

Connecting a USB device

It is possible to play audio and photo files by connecting USB devices to this receiver.

USB

iPod iPhone iPad

AUTO SURR/ALC/

STREAM DIRECT

STANDARD

SURROUND

ADVANCED

SURROUND

iPod iPhone iPad

DIRECT CONTROL

5V 2.1

HOME THX

HDMI 5 INPUT/

MHL ( )

5V 1

USB mass

storage device

% Switch the receiver into standby then connect your USB device to the USB terminal on the

front panel of this receiver.

! This receiver does not support a USB hub.

! For instructions on playing the USB device, see Playing a USB device on page 47.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX56 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX56

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info