Bedienungsanleitung Pioneer SC-LX58-S (Seite 80 von 140) (Englisch)

577805

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Using other functions

n ! This can be set when MANUAL is selected for V.SPs.

! You can’t use the Virtual Height mode when the headphones are connected to this receiver or when any of the stereo, Front

Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Height mode if the surround speakers are on and the FH setting is set to NO. It can also not be

used when playing signals containing actual front height channel information.

! This mode is effective for contents with a sampling frequency of 48 kHz or less.

o ! This can be set when MANUAL is selected for V.SPs.

! You can’t use the Virtual Wide mode when the headphones are connected to this receiver or when any of the stereo, Front

Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Wide mode if the surround speakers are on and the FW setting is set to NO. It can also not be

used when playing signals containing actual front wide channel information.

! This mode is effective for contents with a sampling frequency of 48 kHz or less.

p ! This mode is effective for contents with a sampling frequency of 48 kHz or less.

You can’t use the Virtual Depth mode when the headphones are connected to this receiver or Stream Direct modes is selected.

q ! When Speaker System is set to 7.2ch + Front Bi-Amp, 5.2 Bi-Amp+HDZONE, 5.2ch F+Surr Bi-Amp or 5.2ch F+C Bi-Amp,

the AMP setting is locked at ON and cannot be changed.

! When Speaker System is set to 5.2ch C+Surr Bi-Amp, only ON and Front OFF can be selected for the AMP setting.

Setting the Video options

There are a number of additional picture settings you can make using the VIDEO PARAMETER menu. The

defaults, if not stated, are listed in bold.

Important

! When MAIN/HDZONE is set to HDZONE, the VIDEO PARAMETER menu setting works only for the signal of

the HDMI OUT 1 and HDMI OUT 2 terminals.

Also, when HDZONE is set to ON, VIDEO PARAMETER cannot be set (does not work).

! Note that if an option cannot be selected on the VIDEO PARAMETER menu, it is unavailable due to the current

source, setting and status of the receiver.

! All of the setting items can be set for each input function.

— However, with the audio only input function, VIDEO PARAMETER cannot be set.

— Also, when HDZONE is set to ON, VIDEO PARAMETER cannot be set (does not work).

! Setting items other than V.CONV can only be selected when V.CONV is set to ON.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press VIDEO P..

2 Use i/j to select the setting you want to adjust.

Depending on the current status/mode of the receiver, certain options may not be able to be selected. Check the

table below for notes on this.

3 Use k/l to set as necessary.

See the table below for the options available for each setting.

4 Press RETURN to confirm and exit the menu.

Video parameter menu

Setting What it does Option(s)

V.CONV

(Digital Video Converter)

<a>

Converts all video input signals so they can be output from the HDMI

OUT 1 and HDMI OUT 2 terminals.

OFF

RES

(Resolution)

<b>

Specifies the output resolution of the video signal (when video input

signals are output at the HDMI OUT terminals, select this according

to the resolution of your monitor and the images you wish to watch).

(“576p” indicates the 480p/576p resolution setting.)

AUTO

PURE

576p

720p

1080i

1080p

1080/24p

4K/24p

PCINEMA

(PureCinema)

<c, e>

This setting optimizes the operation of the progressive scanning cir-

cuit for playing film materials. Normally set it to AUTO. If the picture

seems unnatural, switch this to ON or OFF.

AUTO

OFF

P.MOTION

(Progressive Motion)

<c, e>

Adjusts the motion and still picture quality when video output is set

to progressive.

c –4 to +4 d

Default: 0

STREAM

(Stream Smoother)

<e>

This improves elements that reduce picture quality mainly noticeable

in network contents, such as mosquito noise and block noise.

When AUTO is selected, this unit’s Stream Smoother function

automatically turns on when network contents are played on the

player supporting Stream Smoother Link and connected to this unit

by HDMI (assuming that integrated operation with the Control with

HDMI function is set). (Stream Smoother Link)

OFF

AUTO

V.ADJ

(Advanced Video Adjust)

Sets the optimum picture quality for the type of monitor that is con-

nected. Select PDP for plasma displays, LCD for liquid crystal moni-

tors, FPJ for front projectors, PRO for professional monitors. If you

want to adjust the picture quality settings to your personal tastes,

select MEMORY.

PDP

LCD

FPJ

PRO

MEMORY

YNR

<d, e>

Reduces noise in the luminance (Y) signal.

(The image is only an example for checking the effect.)

c 0 to +8 d

Default: 0

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX58-S Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX58-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info