Bedienungsanleitung Pioneer SC-LX58-S (Seite 99 von 140) (Englisch)

577805

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

The MCACC PRO menu

Speaker Distance

Use this to display the distance from the different channels to the listening position. See Speaker Distance on

page 104 for more on this.

1 Select ‘Speaker Distance’ from the MCACC Data Check menu.

2 When ‘MCACC’ is highlighted, use k/l to select the MCACC preset you want to check.

The distance from the various channels set at the selected MCACC preset is displayed. ‘---’ is displayed for chan-

nels that are not connected.

Standing Wave

Use this to display the standing wave related adjustment values for the various MCACC memories. See Standing

Wave on page 97 for more on this.

1 Select ‘Standing Wave’ from the MCACC Data Check menu.

2 When ‘Filter Channel’ is highlighted, use i/j to select the channel for which you want to

check standing wave control.

The standing wave related calibration value for the selected channel stored at the selected MCACC preset and its

graph are displayed.

3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to

check.

Acoustic Cal EQ

Use this to display the calibration values for the frequency response of the various channels set in the different

MCACC presets. See Acoustic Calibration EQ Adjust on page 97 for more on this.

1 Select ‘Acoustic Cal EQ’ from the MCACC Data Check menu.

2 When ‘Ch’ is highlighted, use i/j to select the channel.

The calibration value for the frequency response of the selected channel stored at the selected MCACC preset

and its graph are displayed.

3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to

check.

Group Delay

Use this to display the calibrated speaker group delay results. See Better sound using Phase Control and Full

Band Phase Control on page 66 for more on this.

1 Select ‘Group Delay’ from the MCACC Data Check menu.

2 When ‘Channel’ is highlighted, use k/l to select the channel you want to check.

The result of group delay calibration for the selected channel is displayed.

When measurements have been performed with Full Auto MCACC selected at MCACC PRO or with ALL or

Full Band Phase Ctrl selected when Auto MCACC is selected, the graph before group delay calibration is also

displayed.

When After is selected at Calibration, the group delay after calibration is displayed. Compared to when Before

is selected, with After there is less difference in the delay between frequency bands and the group delay between

the different channels is uniform, allowing you to check the full band phase control effect.

No Data is displayed if the selected group delay has not been measured.

! The Full Band Phase Control function does not work for Dolby Enabled Speakers since they are full-range

speakers.

Data Management

This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listen-

ing positions (or frequency adjustments for the same listening position). This is useful for alternate settings to

match the kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa,

or playing a video game close to the TV).

From this menu you can copy from one preset to another, name presets for easier identification and clear any

ones you don’t need.

! This can be done in Automatically conducting optimum sound tuning (Full Auto MCACC) on page 48 or

Automatic MCACC (Expert) on page 94 , either of which you should have already completed.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘Data Management’ from the HOME MENU.

3 Select the setting you want to adjust.

! Memory Rename – Name your MCACC presets for easy identification (see Renaming MCACC presets on

page 99 ).

! MCACC Memory Copy – Copy settings from one MCACC preset to another (see Copying MCACC preset data

on page 100 ).

! MCACC Memory Clear – Clear any MCACC presets that you don’t want (see Clearing MCACC presets on

page 100 ).

Renaming MCACC presets

If you have several different MCACC presets that you’re using, you may want to rename them for easier

identification.

1 Select ‘Memory Rename’ from the Data Management setup menu.

2 Select the MCACC preset you want to rename, then select an appropriate preset name.

Use i/j to select the preset, then k/l to select a preset name.

3 Repeat for as many MCACC presets as necessary, then press RETURN when you’re finished.

You will return to the Data Management setup menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX58-S Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX58-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info