Bedienungsanleitung Pioneer SC-LX58-S (Seite 106 von 140) (Englisch)

577805

106

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

106

The System Setup and Other Setup menus

Parental Lock

Set restrictions for using Internet services. Also set the password accompanying the usage restrictions.

! Upon shipment from the factory, the password is set to “0000”.

Important

When the INTERNET RADIO or FAVORITES input is selected, the setting made here cannot be reflected.

1 Select ‘Parental Lock’ from the Network Setup menu.

2 Input the password.

Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.

3 Specify whether to turn Parental Lock on or off.

! OFF – Internet services are not restricted.

! ON – Internet services are restricted.

4 If you want to change the password, select Change Password.

In this case, the procedure returns to step 2.

Port Number Setting

On this receiver, there can be up to 5 numbers of ports where signals are received.

1 Select ‘Port Number Setting’ from the Network Setup menu.

2 Select the port number you want to change.

3 Input the port number.

! Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.

! It is not possible to set the same port number more than once.

4 If there are other port numbers you want to change, repeat steps 2 and 3.

Note

We recommend setting the port number to 00023 or within the range of 49152 to 65535.

Checking the Network Information

The setting status of the following network-related items can be checked.

! IP Address – Check the IP address of this receiver.

! MAC Address – Check the MAC address of this receiver.

! Friendly Name – Friendly Name on page 105 .

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘Network Information’ from the HOME MENU.

Display the setting status of the network-related items.

MHL Setup

Select whether or not to switch the input automatically to the MHL input when an MHL-compatible device is

connected.

! Default setting: ON

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

! Press HOME MENU at any time to exit the HOME MENU.

2 Select ‘System Setup’ from the HOME MENU, then press ENTER.

3 Select ‘MHL Setup’ from the System Setup menu.

4 Select the ‘Auto input switching’ from the MHL Setup menu.

5 Use k/l to select the setting.

! OFF – Does not automaticly switch to MHL input.

! ON – Automatically switches to MHL input.

6 Select ‘OK’, then press ENTER.

Notes

! This is only valid for MHL-compatible devices supporting this function.

! When the power is on, the MHL-compatible device is charged. (This receiver supports charging of devices up

to 0.9 A.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX58-S Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX58-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info