Bedienungsanleitung Pioneer SC-LX704 (Seite 154 von 223) (Englisch)

699655

154

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

154

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Setting Item Default Value Setting Details

HDMI 4K Signal

Fomat

Standard When an AV component such as a TV or player

that supports HDMI 4K is connected to this unit,

you can switch the 4K signal format that is input/

output by this unit.

“Standard”: When the AV component connected to

this unit supports the standard 4K signal format (4K

60p 4:2:0 8bit).

“Enhanced”: When the AV component connected to

this unit and the HDMI cable supports the high-

denition 4K signal formats (4K 60p 4:4:4, 4:2:2

and 4K 60p 4:2:0 10bit).

Settings and the corresponding resolutions

Enhanced Standard

4K (3840×2160p)

24/25/30 Hz

4KSMPTE(4096×2160p)

24/25/30 Hz

RGB/

YCbCr4:4:4

8 bit

10/12 bit

YCbCr4:2:2

12 bit

4K (3840×2160p)

50/60 Hz

4K SMPTE(4096×2160p)

50/60 Hz

RGB/

YCbCr4:4:4

8 bit

YCbCr4:2:2

12 bit

YCbCr4:2:0

8 bit

10/12 bit

• When setting to "Enhanced", use Premium

High Speed HDMI Cable or Premium High

Speed HDMI Cable with Ethernet that have the

"PREMIUM Certied Cable" label attached to the

packaging.

• There may be some image disruption depending

on the connected component and the HDMI

cable. If this occurs, switch to "Standard".

Zone 2 HDMI Not Use Make the setting when you output to the Zone 2 TV

connected to the HDMI OUT ZONE 2 jack.

"Use": Enable this function

"Not Use": Disable this function

• When video and audio via HDMI input are output

to ZONE 2, set to "Use".

Setting Item Default Value Setting Details

OSD Language English Select the on-screen display language from the

following.

(North American models) English, German, French,

Spanish, Italian, Dutch, Swedish

(European models) English, German, French,

Spanish, Italian, Dutch, Swedish, Russian, Chinese

Impose OSD On Set whether or not to display information such as

volume adjustment or switching of input on the TV

screen.

"On": OSD is displayed on the TV.

"Off": OSD is not displayed on the TV.

• OSD may not be displayed depending on the

input signal even if "On" is selected. In this case,

change the resolution of the connected device.

Screen Saver 3 minutes Set the time to start the screen saver.

Select a value from "3 minutes", "5 minutes",

"10 minutes" and "Off".

 HDMI Input

Change input assignment between the input selectors and HDMI IN jacks.

Setting Item Default Value Setting Details

BD/DVD HDMI 2

(HDCP 2.3)

"HDMI 1 (HDCP 2.3)" to "HDMI 4 (HDCP 2.3)":

Assign a desired HDMI IN jack to the BD/DVD input

selector. If you do not assign a jack, select "---". To

select an HDMI IN jack already assigned to another

input selector, change its setting to "---" rst.

GAME HDMI 1

(HDCP 2.3)

"HDMI 1 (HDCP 2.3)" to "HDMI 4 (HDCP 2.3)":

Assign a desired HDMI IN jack to the GAME input

selector. If you do not assign a jack, select "---". To

select an HDMI IN jack already assigned to another

input selector, change its setting to "---" rst.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX704 Seite 154

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX704

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info