Bedienungsanleitung Pioneer SC-LX704 (Seite 160 von 223) (Englisch)

699655

160

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

160

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Setting Item Default Value Setting Details

Zone Speaker No Set whether speakers are connected to Zone 2 or

Zone 3 speaker terminals.

"Zone 2": When speakers are connected to Zone 2

speaker terminals

"Zone 2/Zone 3": When connecting speaker to both

ZONE 2 speaker terminal and ZONE 3 speaker

terminals.

• "Zone2/Zone3" cannot be selected when height

speakers are being used.

"No": When speakers are not connected to zone 2

or zone 3 speaker terminals

• This setting cannot be selected when "Zone 2

Preout" is set to "Zone B".

Speaker B No Set whether you will use the Speaker B system.

"No": Speaker B system will not be used

"Yes": Speaker B system will be used without bi-

amp connection

"Bi-Amp": Speaker B system will be used with bi-

amp connection

• "Bi-Amp" cannot be selected when height

speakers are being used.

• This setting will be set to "No" in either of

following cases.

– When "System Setup" - "Speaker" -

"Conguration" - "Zone Speaker" is set to

other than "No"

– When 2 sets of height speakers are used

Zone 2 Preout Zone 2 Set the output destination of the audio that is output

from the ZONE 2 PRE/LINE OUT or ZONE B LINE

OUT terminals.

"Zone 2": When connecting a pre-main amplier in

a separate room (ZONE 2)

"Zone B": When connecting a pre-main amplier,

transmitter of wireless headphones, etc. to ZONE B

• This setting is xed to "Zone 2" when "Zone

Speaker" is set to "Zone 2" or "Zone 2/Zone 3".

Setting Item Default Value Setting Details

Bi-Amp No Set whether the speakers are bi-amp connected.

"No": When speakers are not bi-amp connected to

any speaker terminals

"Front": When using bi-amp connection for the front

speakers only

"Front / Center": When using bi-amp connection

for the front speakers and the center speaker. This

can only be selected when you have set "Speaker

Channels" to "3.1 ch" or "5.1 ch".

"Front / Surround": When using bi-amp connection

for the front speakers and the surround speakers.

This can only be selected when you have set

"Speaker Channels" to "4.1 ch" or "5.1 ch".

• This item will be set to "No" when using ZONE

3 or Speakers B, or when “Speaker Channels”

is set to either “6.1.4ch” or “7.1.4ch”. This item

will also be set to "No" when height speakers

and ZONE speakers are being used at the same

time.

• You cannot select a setting other than "No" or

"Front" when using ZONE speakers.

 Crossover

Change the settings of crossover frequencies.

Setting Item Default Value Setting Details

Front Small Set according to the speakers to be used.

“Small”: When not using oor standing front

speakers.

“Large”: When using oor standing front speakers.

• If "Conguration" - "Subwoofer" is set to "No",

"Front" will be xed to "Large" and the low

pitched range of the other channels will be output

from the front speakers. Refer to the instruction

manual of your speakers to make the setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX704 Seite 160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX704

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info